Paladin Ralph Posted May 8, 2013 Share Posted May 8, 2013 I bought 500 RIO hulls with 209 primers in them and 500 Super Spark 7/8 ozwads, shooting #7.5 shot, made in Italy from Balistic Products. Can you recommend a nice light load to use withthese. At 14.0 gr of Clays is too hard for me. I have a Lee Load-All, but I think I can convert it from mec by weighing what my bushings throw. Link to comment Share on other sites More sharing options...
Charlie Whiskers Posted May 8, 2013 Share Posted May 8, 2013 A MEC 26 bushing puts out 14 gr of Clays if that's any help. Link to comment Share on other sites More sharing options...
Paladin Ralph Posted May 8, 2013 Author Share Posted May 8, 2013 Thanks Charlie Link to comment Share on other sites More sharing options...
Charlie Whiskers Posted May 8, 2013 Share Posted May 8, 2013 Try google.Type in Lee load all powder chart.Then click on Lee load all charge tables.It will give you all the bushings and gr's for most popular powders including Hodgen,makers of Clays. Link to comment Share on other sites More sharing options...
Wasatch Lawman Posted May 8, 2013 Share Posted May 8, 2013 You will not like the RIO shells. I learned the hard way, still have a few hundred on the shelf. The problem I had is the plastic melts and deforms when shot..... They wouldn't shuck out of my SXS. I had to pull everyone. Wasatch Link to comment Share on other sites More sharing options...
Paladin Ralph Posted May 8, 2013 Author Share Posted May 8, 2013 Several folks have metioned I wont like the RIO. I have a Stoger coach and have been using RIO factory rounds, the problem must be in their primed hulls because Ihave had no problem with the factor rounds, except they kick too hard for me, hence my reason to load my own. Link to comment Share on other sites More sharing options...
Doc Faraday, SASS #5749 Posted May 9, 2013 Share Posted May 9, 2013 We do not recommend suggesting loads on the SASSwire. You might try Google. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.