Trigger Mike Posted June 23, 2011 Share Posted June 23, 2011 Since they are going out I bought a new lock plate with the springs. I needed to replace the sear spring and bought one but misplaced it soI thought I would replace the whole thing, only the new one will not fit my enfield rifle. The hole closest to the front is just slightly off from the hole on the other side the screw goes in. I plan on calling the place I bought it from but first thought I'd see if there is a solution out there. Link to comment Share on other sites More sharing options...
Dirty Dan Dawkins Posted June 24, 2011 Share Posted June 24, 2011 Theres a book from Track of the Wolf on making springs. In fact, they got lots of dandy books on gun building. http://www.trackofthewolf.com/Categories/partDetail.aspx?catId=4&subId=38&styleId=135&partNum=BOOK-SVS Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.