Jump to content
SASS Wire Forum

Waymore Loco

Members
  • Content Count

    681
  • Joined

  • Last visited

  • Days Won

    17

Everything posted by Waymore Loco

  1. Shipped this morning to Taos & Doc Marks. Your packages are "supposed " to arrive this Friday.
  2. You need two sets? PM me your address and I'll try to get them in the mail Monday.
  3. Are they the same as Wrangler grips? I have Wrangler take offs after I put Super Blackhawk take offs on my Wranglers.
  4. Not only is it sold, it is in the new owners possession. Lol
  5. I'm sure you're right. I couldn't remember which brand did that.
  6. Are these the ones that don't always switch when you shoot the first barrel and you have to bump the stock to shoot the second barrel?
  7. There is some 45 stuff for sale on the SASS Merchant Corner.
  8. I did some 44 Magnum testing with the chronograph today. The results are... 5.8 grains of Red Dot = 820 FPS 6 grains of Trail Boss = 785 FPS 5.5 grains of HP-38 = 628 FPS 4.7 grains of Titegroup = 733 FPS These are averages shot out of a Ruger with a 5 1/2" barrel. 240 grain SWC and Federal 150 primer.
  9. I used to race stock cars. I told the crew when it got to be work and not fun we were done. Like I said, I used to race. Life is too short to do something that is fun and not enjoy it.
  10. That's what I'm thinking. I'm doing this for fun and those guys didn't seem like they were having much fun.
  11. I had 4.8 grains of Titegroup when they were complaining that I was too hot. I'm afraid to cut it back much more.
  12. I used the same loads at Plum Creek and it wasn't a problem.
  13. My target is for my own tests and denting it isn't the problem. I have no control over the targets at our local matches which I did damage. I'm sure the guy who yelled at me for damaging their targets thinks I should shoot a 38 Special like he does. I just need to know that I have my 44 loads correct. Happy Thanksgiving!
  14. The load I had been using was 4.8 grains of Titegroup with a 240 gn swc Starline 44 Mag casing with a regular Federal large pistol primer.
  15. I just grabbed a thick piece of mild steel of the scrap and leaned it up at 7 yards.
  16. I have a few Specials. They run through the Marlin just fine. I can't really tell a difference. Using the same bullet, they have about the same recoil. Happy Thanksgiving to y'all!
  17. I don't have any Clays but I'll try to find some and give it a shot.
  18. I tried 6 grains of Trail Boss with the 240 gn SWC. The casing was full. I use Federal primers. It left a big bulge in my metal target.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.