Jump to content
SASS Wire Forum

FS Stainless steel mag tube pieces/project PRICE REDUCED 1/16


Recommended Posts

A project for the do it yourselfer, that wants Stainless mag tubes, and is willing/able to do a little finish/fitting work.  These are 2 pieces I have left over from when I used to make SS mag tubes for 73's.  They are threaded for the stock magazine cap and work with factory followers(or SS ones that mimic factory dimensions).  They are not cut to length, but are long enough to do 20" guns or shorter and in addition to needing cut to length, will need the cross pin slot(pin in the mag hanger) added to fit your gun.  This tubing is what I could source back in the day(no longer available) and is slightly undersized for factory mag hangers, running .627-.630" and will likely need shimmed in the hanger, or the carbine band may be able to be tightened up enough(or may need modified as well) in that style of gun.  To be clear, it's not a perfect external diameter fit.  I'm selling them together, as one has a "dent"(circled in the pic, but practically invisible from the outside) that will not allow a follower to slide through internally and would need pressed open, or the follower modified.  It's not a kink dent, more of a slight depression, but will need something done to make it usable.  The material polishes up nicely if you want a full mirror shine, or scotchbrite will add a nice brushed look.  I ran them in my gun for 15 years or so, up until my recent carbon fiber project , and it holds up excellent.  Selling both for $75 $55 shipped.  First I'll take it posted here gets it.  Paypal friends and family or snail mail a check.  Thanks. 

20231225_103909.jpg

20231225_103958.jpg

20231225_104009.jpg

Edited by Fireball #7709 Life
Link to comment
Share on other sites

  • Fireball #7709 Life changed the title to FS Stainless steel mag tube pieces/project PRICE REDUCED
  • Fireball #7709 Life changed the title to FS Stainless steel mag tube pieces/project PRICE REDUCED 12/31
  • Fireball #7709 Life changed the title to FS Stainless steel mag tube pieces/project PRICE REDUCED 1/16

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.