Badfinger & Sassy Posted March 27, 2020 Share Posted March 27, 2020 Working on making a pair of custom NM 32 H&Rs for the wife. I've put a pair of stainless birdshead grip frames on blued pistols, installed Super Black Hawk hammers, and she loves 'em. The one pistol had badly worn cylinder notches that were repaired, lasted about a year, but is now slipping past the notches again. I borrowed a cylinder from another spare pistol for now (which now works perfectly) but I 'm in bad need of another cylinder. So if anyone out there might possibly have a spare blued cylinder lying around they may part with I would be very interested. Also on another 32 H&R pistol of hers the grip, which was partially cracked from the factory, gave up the ghost and I am now in need of one plane ivory grip. I used my evil dremmel to make the non-slip bone looking notches. Link to comment Share on other sites More sharing options...
Snake-eye, SASS#45097 Posted March 27, 2020 Share Posted March 27, 2020 This off your topic but how did you fit the SBH into the single sixes. Would like to do that for mine. Link to comment Share on other sites More sharing options...
Badfinger & Sassy Posted March 29, 2020 Author Share Posted March 29, 2020 On 3/26/2020 at 9:57 PM, Snake-eye, SASS#45097 said: This off your topic but how did you fit the SBH into the single sixes. Would like to do that for mine. I cut the spurs off the 32 hammers and after cutting the spurs off the SBH I welded them on the 32s. The hardest part was lining the SBH spurs up correctly but it wasn't bad at all. Link to comment Share on other sites More sharing options...
Snake-eye, SASS#45097 Posted March 29, 2020 Share Posted March 29, 2020 Great job! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.