Jump to content
SASS Wire Forum

antique pocket gun FS new price


Irontree

Recommended Posts

1 antique U.S. Arms, N.Y. 32 cal

http://pic20.picturetrail.com/VOL1366/13662156/24622802/410879661.jpg

http://pic20.picturetrail.com/VOL1366/13662156/24622802/410879660.jpg

 

At the top of these pictures is the U.S. Arms, N.Y. 32 rimfire or 1880's manufacture. Reconditioned with a newly crafted cylinder hand and spring. It's timing/lockup is now secure and correct. Reloadable .32 rimfire brass is available from Dixie Gun Works, Union City TN. if you don't want to make your own. Heeled and hollow base bullets are available from several sources (Midway, Buffalo Arms, Dixie Gun Works).

This gun was tested with 20 rnds Canuck .32 rimfire after reconditioning and proved surprisingly accurate and a hell of a lot of fun at 20ft. $125 shipped

 

SPF* 2nd in these picture is a Smith & Wesson #1&1/2 in .38 center fire. This gun is also of 1880's manufacture with a very good bore that shows freckling but no real pitting.

I have owned this gun for several years and have shot it extensively. It locks up as tight as the day it was made and functions perfectly. Grips as you can see are not cracked or chipped. There is some loss of the finish from flaking and some rough carry. All and all a very nice gun for it's age. $270 Shipped

 

SPF* 3rd in these pictures is a Smith & Wesson "Baby Russian" with the not so common 4 inch barrel. Of 1876-1877 manufacture. This gun has been brushed and renickled at some time but the lock up is still tight and the action is right on the mark. The bore is not as good as it's sister gun above but would rate around a 7 of 10. Over the years I have personally faced down and killed many dangerous empty gallon milk jugs with this very gun at 25 yrds. $250 Shipped

Link to comment
Share on other sites

BTT for another run.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.