Jump to content
SASS Wire Forum

Chert Rock Chuck

Members
  • Posts

    520
  • Joined

  • Last visited

Posts posted by Chert Rock Chuck

  1. 26 minutes ago, Tell Sackett SASS 18436 said:

    There are some available on the classifieds-if applicable!

    I do appreciate that Tell, but I won’t be able to attend EOT.

  2. 8 hours ago, Randy Saint Eagle, SASS # 64903 said:

    I had the same problem a few months ago and it was my card/ bank suspecting fraud, I contacted the bank and then it went through ok.

     

     Randy 

    Randy was right.

    Got notification this morning of suspicious activity with my card.

    Got it sorted and order placed.

     Pretty daggum pricey, but with a limit as high as 10k I guess it removes all excuses for not getting what I need now.

    • Like 1
  3. On 1/16/2023 at 9:12 AM, Nostrum Damus SASS #110702 said:

    Thanks, all.  Confirms what I thought -- 150W continuous, 300W peak, will be plenty sufficient.  Obviously, the larger the battery capacity, the longer the casefeeder will run without the necessity to bring the unit home for recharging.

     

    (Cholla, I'm in a commercial rented space -- lighting is provided but it is a commercial, not residential, single phase 277 volt system.  They want to charge me an arm and a leg to install a transformer and meter for 110V service, so that's a no-go.)

    I retract my prior comment.

  4. 2 hours ago, Hawk Eyes Hudson said:

    Hey Chert Rock Chuck,

     

    Will a Pioneer Gun works short stroke work on a C & I Large Caliber Carrier for a Miroku 1873.  I have contacted C&I about their 4th gen kit for fitment capability on the Miroku.  PG says in ad that you can use your original lever for their stroke kits so the kit is naturally cheaper.  PG as you know has not sold the kit for sometime.  

    Just trying to save a buck but don't wanna buy a pig in the polk!  I have an C&I aluminum carrier and looking for a corresponding kit.  Anywhose talked like you had a lot of parts.  Just checking. 

     

    Hawk Eyes Hudson 

    I’m no gunsmith.

     I have a C&I gen 3, lg caliber short stroke kit in my Uberti ’73. It did not require a new lever.

     I used the aluminum carrier that came with the kit until my gunsmith milled the original brass carrier for weight reduction and reinstalled it.

     While the lever didn’t need to be replaced, it did need tweaking just a bit to get timing right.

     I’ve never owned anything from PGW but have heard alot of negative feedback from folks (Champion level shooters) that have.

  5.   I understand, I was referring to some of the shooters that travel between clubs in each of our areas. 
      It should sell easily enough though I’m sure. Best of luck with your sale.

    • Like 1
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.