[Uberti1873 Competition Rifle............HELP]

Spitflier - on a side note, I am new to CAS also and after putting over 2,000 rounds threw my new guns, my opinion is that your guns must operate properly for you and your capabilities. You don't need a Corvette to drive to church... Tuning a gun shaves thousands of a second off your time. Missing the target costs you 5 sec. Transition between guns on a stage saves 'seconds' off your time. You must make 1,000 modifications to your guns to save 1 sec off your time. See where I'm going with this?

 

Concentrate on the important things. Try out as many guns as you can to see what you 'need' to be competitive at your level. I bought SASS Rugers because they come with a hammer that fits me. I changed the springs myself. I bought a CAS 1873 because the stock is already modified. The short stroke will help anyone. With a few adjustments, it was smooth operating for a starting shooter.

 

I bought a used shotgun that someone had modified and I spent countless hours (lots of Dollars if you can't do your own work, which few of us can do) to make it run right. For me, the shotgun was not so important and I knew what I was getting into; barrel separation, lock timing, double discharge problem, improper stock finish, bent firing pins, etc. SO , consider your purchases carefully. A larger investment up front may provide a smoother ride.

 

There is nothing worse than going to the line with a gun your not sure about...

 

New vs. Used: if you find a good deal on used, buy the time you need to really go fast you will be ready for a high end gun (if the used one lasts). Then you'll have a 'backup' when things go South with your main guns and have to take a trip to the Smith.

[Uberti1873 Competition Rifle............HELP]

8 hours ago, Spitflier said:

I don’t know what others are referring to but I would like to hear from anyone who has used the Uberti 1873 competition rifle. I am starting to assemble my gear for CAS and need to get a rifle next. My Rugers are 357 so I would stay with that for a rifle. I don’t see myself going to any top levels but I want to buy something that would work anywhere. I see this as compromise to an action job by say Cody or others. any feedback?

 

I bought one last year. It did need work.

I spent about 4 hours on the original parts and it is as slick as any worked gun I have tried.

Only added part was a stainless mag spring because the original springs rust out in no time here in the Southeast. And some leather work on the comb and lever.

 

As someone said, it's about 70% ready. More like 90% if you have some tools and do some reading on line on tuning springs. I would like to change the lever safety spring from leaf to coil spring. Can't get the leaf spring light enough w/o making it too weak and break.