Jump to content

SlicLee SASS #16638 Life

  • Posts

  • Joined

  • Last visited

Posts posted by SlicLee SASS #16638 Life

  1. One rainy day I got thrown out,"go buy a gun get out"

    This UBERTI 38/55 called to me thrice, was pretty, no one wanted to look when I got home, got inexpensive sights,got brass,bore dimensions, bullets, loaded poor accuracy,

    the bullets were too small.sights didn't hold still. got larger bullets, smokeless powder, better sights weren't many available all very expensive, got better bullets

    finally bought MVA sights were more expensive than the rifle finally broke 2 inches, sights were great, WORTH THE MONEY.

    Finally got a bullet maker, yes i can make almost a .380 sized bullet, if its better, I will get a mold, didn't make .380 but I had 3/4" all the time at 100, at .380 sized my UBERTI


    Wasn't strong enough at 500 for SILHOUETTE.

    Tried out a 45/110, didn't need,I was thin built, was so accurate, he used black powder, a SHARPS RIFLE, hurt too much, tried out a 40/65 not strong enough, a 45/90,

    was strong but tried a 40/70 Sharps, nice great accuracy,MVA SIGHTS, could alter chamber to 40/90 and so it went.

    Try all at events, everyone wants you to try their rifle.

  2. When I see a cartridge with a red bullet, looks more like a girls lipstick tube. I believe this has been done years back. It is more colorful, doesn't match my colors :P

    I hope it remains a good thing, if it was a bit greenish ^_^

  3. With due respect to all, why not call a expert on it if its a original. I have 2 97's almost new when I got them in the early 90's, a take down and a 20" solid, have no thread wear.

    Too many out there take them apart and miss and force the last thread, no reason. Lee

  4. Thats right, hard chromed finish, gun powder slides right off, 20" oct barrel, 38/40, only slight area is left side of rear stock is a bit dull from placing

    on stages, marble tang sight,SS springs, carrier is brass, every option, this rifle can and has broke 3 seconds in 10 shot stages at nationals and local

    shoots, have extra ultra light hammer spring, various parts, 3rd stage C&I short stroke, leather on lever,etc.

    Has been sitting for many years unused, was soaking,,used 3 seasons only as I acquired a Winchester 92

    original 38/40, changed a Miroko 92 from 44 mag blue to 38/40 hard chrome, light as a feather, AWA Lightining 20" hard chrome, my cup runneth over! Only 73 is for sale $1200 +ship any way you want in CONUS


    EMAIL ONLY sliclee@bellsouth.net

  5. If you have decided what caliber your main match pistols will be would make sense to make derringer that caliber also. However, if you want,need, another hide away

    pistol to grab and shove in your pocket a derringer is the one. You've heard BOND is the only one, as far as accuracy, the length of the barrel. I speak from experience

    of carry gun barrel length, minimum and max length to hit at X feet, BOND AGAIN if you use the right diameter bullet.

    When it first came out, I felt it in my chest at the indoor range knew it was a magnum load, didn't see the gun in his hand being a nosy critter I stood and looked, he said come over

    look closer, a 38/357 shiny stainless 2 barrels, 3 inch, others I saw so far none shot decent at 20 feet, this was different, he had a box of Federal 357 mag,125 grain @ 1425.

    I laughed at him, he brought the target in, keep laughing fool. He emptied, dropped the gun here shut your mouth load fire, sent out target whoo so far almost 15 yds.

    Put top flat with tip, hits. Fired, 1425 wow 9 ring next 10 ring. Was sold. Had home carried 357 sp101 3 inch, derringer was 3",shot the same with win 110 mag

    made up 50 38 sp cases for cowboy, light loads to go thru paper plates, first CA shoot took it showed it let others I knew shoot it, Meister sent me 10 in .358 was same as

    Federal Winny, pointy,lead very shiny,130 grain, looked like Lone Rangers bullets, very accurate, bought 500.

    Called Bond for another barrel to match 44 mag, main match gun size, wanted a tight barrel, cost me a bit more. Fired Win STip 175 grain,wow was just as accurate had to hold on tight, Looking down those 2 holes from the front

    looking down those 2 big holes are awesome.

  • Create New...

Important Information

By using this site, you agree to our Terms of Use.