[Hunting with a 44-40 ?]

 I cast this bullet which weighs around 220 grs. for my 1866 Sporting Rifle in 44-40-

 

 

 

 It has plenty of lube capacity for loading BP, and I've used it with both BP and smokeless. Plenty accurate for deer to at least 200 yds, IF you're good at range estimation. I load 9.5 grs. of Unique, Power Pistol or Herco and get right around 1300 fps with any of the three, same velocity, and accuracy with a case full of Swiss 3Fg. . A couple of years ago I whacked a buck with this load and he died right away with no complaints.

 

 

 

  The bullet sailed on through for parts unknown, so I don't think another couple hundred fps would've made a bit of difference.

 

 Cholla

[Source for Bullet Mould]

I

 

NOE 432421 in a 4-cavity and it casts great bullets, but they weigh almost 260 grs., if that matters to you. Also, they're currently out of stock and I've found that sometimes it takes quite awhile for them to get moulds back in stock.

 

As others have said, Tom at Accurate moulds is a great person with whom to deal. He cuts moulds when they're ordered, you have your choice of iron, brass or aluminum, and the number of designs in his catalog is mind boggling. Accurate-.44-moulds

He's a little higher than NOE but his moulds are works of art and for no additional charge you he will modify the design of any mould to meet your requirements, if you wish.

 

Cholla

[Ever Wonder What's Under That Red Uberti Wood Finish?]

Thanks for the kind words, guys.

 

 

That looks great. How long did it take? I always wondered why Uberti uses that red finish. Then I bought an original Winchester 1873 made in 1887. Wouldn't you know it, but the wood looks really close to uberti wood. So I suppose they tried to make it look aged, but then make the case coloring look brand new. I prefer my guns to look new and then age them myself. It's great knowing that I can strip my uberti and make it look new again. Or just stick with my brand new Winchester. One can never have too many options

 

The finish is BLO cut 3-1 with pure gun turpentine, no stain is used at all. The process takes weeks, sometimes months if the oil is slow drying and is definitely a labor of love. I strip the stock with the stuff from the hardware that would exfoliate an elephant. After whiskering the stock, using 1" squares of wet/dry sandpaper dipped in the oil mix, I sand the stock beginning with 220 grit, then 320, then finally 400 three to four times with each grit, allowing it to dry for 30 minutes before sloppily wiping it off with paper towels . The sand paper removes almost no wood, but makes a sort of mud that fills the grain. After each round of sandpaper, I let the stock dry. After the final round with 400 grit, I apply a tiny amount of the oil to the stock and rub it in with the heel of my hand and let each coat completely dry. I have no idea how many coats I apply, but it is a bunch. I stop when I like the looks of the stock.

 

This one actually didn't turn out as good as the others I have done as the oil didn't seem to want to dry, and I can't figure out why. Maybe BLO get old or something. I've been using the same can for years. Several years ago I did a stock on a '70 vintage Ruger 77. That stock had all the beauty of a mud fence, but refinishing it as described above, it took on a pretty, deep look and exposed grain that I had no idea was there. Ditto for an old Ruger 10-22 that my Dad bought me when I was a kid:

 

Before:

 

 

After:

 

 

Redleg, coming over there and shooting is never far from my mind. I have a full set of ancient 38-40's I want to come shoot with BP, but I have to get some more brass and some more BP!

 

Cholla

[Ever Wonder What's Under That Red Uberti Wood Finish?]

Factory finish-

 

 

After stripping and hand rubbing in linseed oil-

 

[Has anyone ever tried hunting with their SASS gun?]

Get out there and do it, Dan!

 

Cholla

[Has anyone ever tried hunting with their SASS gun?]

I love using old and reproductions of the old firearms for hunting.

 

This 131 year old '73 Winchester in 38-40 worked perfectly this year. Was loaded with 1.9cc of Swiss 3Fg under a home-cast 192 gr. FP cast from ordinary wheelweights.

 

 

 

Last seasons take with the pictured Bisley in 45 Colt. Both were right at 50 yds. out and taken with a cast bullet handload. (A little luck helps with shots like these!)

 

 

 

 

This little Uberti has been a wonderful hunting arm for me.

 

 

 

 

 

This old '97 got me a limit of the little gray rockets.

 

 

Cholla

[Round nosed bullets in the Rifle]

I guess it's a good thing nobody told the owners of 1886 Winchester 45-70's not to shoot RN bullets in them for the last 130 years.

[Thanks for the replies.]

If it helps with your decision, I sold a 3rd Generation Colt 4 3/4" .44 Special and kept a like configured Uberti. Absolutely no functional difference and the Uberti has provided yeoman service, especially in the field!

 

Good luck in your quest.

 

Cholla

[1873 Rifle in 44Mag]

Dang right they're out there....

 

 

 

...not even close to for sale, though.

 

Regarding the strength of the 1873 action, I've not seen a single documented case of an action destroyed, but over on the CAS forum there are a couple of pics of toggle link actions that were over loaded. In each case, the action survived intact, the barrel, not so much.