Search the Community

From the infomercial it would seem to be the ideal product to clean up an old, Rusty firearm. Just wondering if it does anything it says.

When loading my 45-70 and 45-60 cartridges, I use a 24" drop tube. When I occasionally load BP in my 45 colt cartridges (rifle and pistol) I rigged an 18' drop tube through my RCBS Little Dandy powder measure (mounted on a Lee four hole turret press). When I get to the powder step, I pour powder from a Hornady BP measure into a cut down shotshell and then drop tube the powder into the case, followed by bullet seating and then Lee Factory Crimp. I loaded my first 50 rounds of 38-40 for my Uberti 66 carbine today, utilizing the same method. I'm able to get 30 grains of GOEX 2f into the case and allow for about 1/16' compression of the powder with the 180gr Big Lube bullet. This procedure is not really that slow, I just have to dispense the powder into the shotshell and then drop it into the case. I don't use the same slow trickle method as I do for the large rifle cartridges, just dump into the funnel and let the drop tube help settle the powder. I got to thinking that maybe I could just mount the Hornady measure on the press and drop the powder directly into the case. I tested this and the 30 grains of powder filled the case to about 1/4" from the mouth. This would allow for too much compression. I could lower the amount of powder to about 25 grains to get the correct amount of compression and save on some powder. So for SASS shooting I betting this method would be more than satisfactory for accuracy, but what about cleaner burning? I've always read that drop tubing leads to a cleaner burn and better accuracy, especially at longer ranges. What say you all? Drop tube, yay or nay? Wyatt