Jump to content
SASS Wire Forum

Recommended Posts

Posted

For those of us that don’t want to lose the regular use of an 1887/magazine tube use, where are guys getting the follower and carrier/guide some of the factory options come with?  Thank you.

 

Posted

To answer your question, a manufacturer would be helpful. As far as I know, Chiappa is the only company that offers the "Drop 2" mod.

Posted
7 hours ago, Catamount Kid said:

For those of us that don’t want to lose the regular use of an 1887/magazine tube use, where are guys getting the follower and carrier/guide some of the factory options come with?  Thank you.

 

 

The only factory "Drop two" option for an 1887 is a Chiappa. Any spare parts would have to be sourced through them.

 

Personally I'd buy another 87. The new Cimarron 87s will work just fine right out of the box.

 

Older IAC and Norinco 87s were hit or miss right out of the box.

  • Like 1
Posted

The Newer Cimarron 87 works straight out of the box also .

But No drop two from the factory.

You would have to send it to Lassiter. 

  • Like 3
Posted

Chiappa is the only one that I know of with a factory drop 2. My opinion it ran worst than a stock one. I would avoid it unless it's all you can find. At which point send it to Lassiter. 

Cimarron's are going to be you best opinion to run outta the box and not lose the tube. You're probably not going to be as fast as a Lassiter or Coyote Cap modified one.

  • Like 4
Posted

Not that I am an expert. But I have found that if you pick up the 1887 with you right hand put the barrel on the table for support and hold the lever back with a fair amount of force you can load two (with the left hand) much like the modification. This works with my 28inch Cimarron 1887. Although I have also found if you have too much of an angle to the shotgun (I put the butt under my arm for stability) the first shell will at times slide into the chamber and cause problems. 

  • Like 1
Posted

I have two Chiappa 87's with Lassiter's drop 2 conversions.  Of course, they work well, but cannot be stoked. 

 

I also have a Chiappa 87 that I purchased as their "Fast Load" model, sku 930.004.  For that gun I also purchased a "standard load" right cartridge guide (790.207) and carrier (770.404).  Normally, I use this gun with the standard right cartridge guide for wild bunch since in this configuration it can be stoked.  However, it can serve as a backup to my cowboy 87 by simply replacing the right cartridge guide with the fast load version.  The gun  runs fine in either configuration, but it did require the usual action work (funneling the chamber mouth, polishing mag follower, spring lightning, etc.)

 

My 4th 87 is a Cimarron version and with action work (but no drop 2) it runs well, but is strictly reserved for stoked wild bunch.

 

I've not actually tried it, but I would expect I could replace the modified right cartridge guide in my Lassiter 87's with the factory standard load guide and have them run well stoked.

 

Lots of flexibility.

 

TReb

  • Thanks 1
Posted

I have two of Lassiters chiappa and when I sent it to him I got the right side carrier from Taylor and company and sent them to him and can run either way 

love them 

  • 1 month later...
Posted
1 hour ago, Catamount Kid said:

Are they any pictures of what to do to the right side carrier?  I have a spare regular one I could modify.

Coyote Cap modified the front of the magazine follower, and the left side carrier 'tongue' nose for his load 2.

You can still stoke it.....

  • Like 1
  • Thanks 1
Posted
1 hour ago, Catamount Kid said:

Any pictures of those mods?

 

There are at least three different ways the mod can be done. Coyote Cap developed one method another method I believe was designed by Lassiter, and the third was one Fireball pioneered. There may be other ways and I may have the designers of the designs incorrect. Chiappa has a drop 2 design but I have no idea who developed it.

 

Long story short it's not something you can learn from a picture. Parts have to be built up with a Tig or laser welder and then re-machined to the correct profile.

 

You have to a complete understanding of how the action of an 87 works including it's timing. 

  • Like 1
  • Thanks 1
Posted

Run what you brung .

Lassiter did one of my 87's for me and every time I went out to shoot it besides Cowboy Action Shooting. 

I wanted to stoke it But could not .

So I bought the Cimarron Chinese built 87 and it works fairly good out of the box.

Im more then happy with the Cimarron 87.

Rooster 

20260807_134549.thumb.jpg.54ab1ee40065a83e41b1a3e14888d23b.jpg

Posted
On 7/5/2026 at 6:12 PM, The Original Lumpy Gritz said:

Coyote Cap did such a mod.

Don't know who does it now.

Lassiter in Middleton, Ohio 

  • Thanks 2
Posted (edited)
13 hours ago, Catamount Kid said:

Any pictures of those mods?

Unless you know what to look for, you won't 'see' the modifications. 

You have to remove both sides of the carrier and totally understand the interaction of the parts.

Also the magazine follower gets a hole drilled in its nose.

Contact Lassiter......

Edited by The Original Lumpy Gritz
  • Like 1
Posted

I have a CC 87 with his drop two. It is fine if you don't try to load 2 by slamming them hard into the carrier or else it drops all the way down. Put in a stronger spring to help hold it up. But it is fun to load it and shoot 5 in a row. Also have picked up a used chiappa w/o drop 2 so will play with that before deciding what to do.

Posted
On 7/5/2026 at 5:12 PM, The Original Lumpy Gritz said:

Coyote Cap did such a mod.

Don't know who does it now.

 

1 hour ago, Rye Miles #13621 said:

Lassiter in Middleton, Ohio 


Slater in Tennessee does a drop two mod similar Lassiter’s. 
 

 I have had 87s with Lassiter’s and Slater’s load 2 modification. Both work equally well. 

  • Like 2
  • Thanks 1
Posted

The mod I want is not the you can only drop two, and lose the ability to use the mag tube for other stuff.

 

i want the one that will let you drop two without going down too far, but you can still force it all the way down and use the mag tube.

Posted

You will have to look for a coyote cap 1887 as no one does that drop 2 the way he did.

  • Thanks 1
Posted

I love my cc 87.  Special work. Met him at the shot show. A very nice guy...

  • Thanks 1
Posted
12 minutes ago, SnakeM said:

I love my cc 87.  Special work. Met him at the shot show. A very nice guy...

Yes, he sure was! Shoes that will never be filled again. 

He took the time at EOT to show me exactly what he did to create the drop 2 modification.

The trickiest part is the extension of the tongue on the left side lifter.

If it wasn't for Cap, we would never had the '87 for this game.

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.