Dapper Dave Posted February 27, 2025 Posted February 27, 2025 It seems kinda cheap and cheesy. It IS out of the way, and as long as it doesn't move, shouldn't be an issue, it seems, just curious. is there a safety delet for this, if I wanted to get rid of it? Thank you for your replies.
DeaconKC Posted February 27, 2025 Posted February 27, 2025 Okay, it is very easy to remove on the Rossis and it looks like it is the same on the Heritage. Remove the bolt, drive the pin out, then you can lift the safety out [watch the spring]. The hole remaining is easily filled with a cut down .25 ACP case.
Abilene Slim SASS 81783 Posted February 28, 2025 Posted February 28, 2025 8 hours ago, DeaconKC said: Okay, it is very easy to remove on the Rossis and it looks like it is the same on the Heritage. Remove the bolt, drive the pin out, then you can lift the safety out [watch the spring]. The hole remaining is easily filled with a cut down .25 ACP case. Or a nice looking plug sold at www.stevesgunz.com
Rooster Ron Wayne Posted February 28, 2025 Posted February 28, 2025 Use the remove kit that Abilene Slim just posted about from Stevesgunz It's truly the easiest and best you can get . I have done several of mine and they look very good.
watab kid Posted March 1, 2025 Posted March 1, 2025 im all for remmoving it - i did that on my stoeger shotgun
Dapper Dave Posted March 2, 2025 Author Posted March 2, 2025 I had my gunsmith buddy do the safety removal on the Stoeger. I guess I could get the kit ya'll posted up, looks like a great idea, thank you!
Recommended Posts
Archived
This topic is now archived and is closed to further replies.