Which loctite?

[Marshal Mo Hare, SASS #45984]

I have a keyboard/mouse tray mounted under a table top so I can hide it away or pull it out to use on the pc. The screws come loose and the tray wiggles a bit. Which loctite should I use?

 

 

[Chickasaw Bill SASS #70001]

Blue should hold 

 

  CB 

 

  

[Sgt. C.J. Sabre, SASS #46770]

What kind of table? Metal, wood, or particleboard? If metal, then Chickasaw Bill's advice is good. If wood, you'll have to try something else. A size larger screw comes to mind.

If particleboard, you'll probably have to reinforce it first.  

[Marshal Mo Hare, SASS #45984]

It’s a wood laminate table but the screws are metal on metal like in the pix. I will try blue

 

 

[Duffield, SASS #23454]

If the screws come Ollie in the wood laminate  use super glue.

Loose ( danged Otto)

[Marshal Mo Hare, SASS #45984]

This is the connection to the table, has not wiggled loose yet.

 

[Rip Snorter]

Barbarian that I am, if I liked the setup, I'd drill and bolt it.

[Marshal Mo Hare, SASS #45984]

7 minutes ago, Rip Snorter said:

Barbarian that I am, if I liked the setup, I'd drill and bolt it.

Conan and even Loana would be proud.

[Tooky Slim]

for loose screws, try breaking a toothpick off in the "hole", and reinstalling the screw...maybe a drop of gorilla glue to be sure

[Sgt. C.J. Sabre, SASS #46770]

2 hours ago, Marshal Mo Hare, SASS #45984 said:

It’s a wood laminate table but the screws are metal on metal like in the pix. I will try blue

For something like that, clear or black nail polish will work.

[Marshal Mo Hare, SASS #45984]

Bought two tubes of blue loctite, each .21 fl Oz.  After using on four screws I figure I still have a total of .419 fl Oz.

[Chickasaw Bill SASS #70001]

with Loctite , a little goes a long way 

 

  CB