Buckshot Bear Posted May 15 Share Posted May 15 One of you pards helped me out enormously with something last year but I can't remember who You helped me by drawing a perfect six gun cylinder with dots in the middle of the chamber where I could center punch for drilling and giving me the file so I could print it out and use it as a template for my gun cart for drilling holes to put brass case heads in the holes. Because on the SASS Wire you have to empty your inbox, I've forgotten who was kind enough to help me And sorry to be a bother....I have another request.....so you have the choice of staying mute Here's the drawing you did for me last time - 3 Quote Link to comment Share on other sites More sharing options...
Injun Ryder, SASS #36201L Posted May 16 Share Posted May 16 Well, it wasn't me so that narrows the list down a bit. 1 4 Quote Link to comment Share on other sites More sharing options...
Marshal Mo Hare, SASS #45984 Posted May 16 Share Posted May 16 Also not me. 1 1 Quote Link to comment Share on other sites More sharing options...
Wallaby Jack, SASS #44062 Posted May 16 Share Posted May 16 ....... neither I was .... 1 1 Quote Link to comment Share on other sites More sharing options...
Eyesa Horg Posted May 16 Share Posted May 16 Me neither, but nice job! 1 1 Quote Link to comment Share on other sites More sharing options...
Old Man Graybeard Posted May 16 Share Posted May 16 Me too neither... 1 1 Quote Link to comment Share on other sites More sharing options...
Chickasaw Bill SASS #70001 Posted May 16 Share Posted May 16 wern't me just what is the ODD BALL idea , you are kickin' around this time ? CB 1 1 Quote Link to comment Share on other sites More sharing options...
Texas Maverick Posted May 16 Share Posted May 16 (edited) Not I but lay the new request on us and we will see who comes up with the best answer. I do see my decals though. Great job on the cart. TM Edited May 16 by Texas Maverick 1 1 Quote Link to comment Share on other sites More sharing options...
Buckshot Bear Posted May 16 Author Share Posted May 16 8 hours ago, Texas Maverick said: Not I but lay the new request on us and we will see who comes up with the best answer. I do see my decals though. Great job on the cart. TM Thanks TM, they do look good don't they and we do get a lot of comments on them. 3 Quote Link to comment Share on other sites More sharing options...
Pat Riot Posted May 16 Share Posted May 16 ‘Twasn’t me. 1 1 Quote Link to comment Share on other sites More sharing options...
Sedalia Dave Posted May 16 Share Posted May 16 Dang, I guess I'll have to fess up and take responsibility for being a nice guy. This sure is ruining my bad reputation. 2 1 6 Quote Link to comment Share on other sites More sharing options...
One Gun Jimmy Posted May 17 Share Posted May 17 I may be able to help, I can do CAD design. Let me know what your after and I'd gladly assist 3 Quote Link to comment Share on other sites More sharing options...
watab kid Posted May 17 Share Posted May 17 (edited) wasnt me but it is the cowboy way , we help wjen we can and expect nothing , just pass it forward and help someone else came back to add that ive had help from a few over the years , offered help to many over the years , part of the fun of all this is doing just that when needed , at least it is for me , its why i carry a clearing rod on my cart and a few tools as well as some first aid - spare ammo , a backup gun or two , just the way we roll Edited May 17 by watab kid 3 Quote Link to comment Share on other sites More sharing options...
Buckshot Bear Posted May 17 Author Share Posted May 17 5 hours ago, Sedalia Dave said: Dang, I guess I'll have to fess up and take responsibility for being a nice guy. This sure is ruining my bad reputation. Thanks Dave, mate I'm sorry that I forgot it was you....that file is precious to me and I've printed and used many now. I need something like this below that I found on the web. What I'm trying to do is cut the brass heads of sixteen (16) shotshells and put them into drilled holes in a piece of square stained and routed timber and then varnish it all. The drilled holes will be 20mm, so I would dearly like (if possible and not too much of a hassle) 4 x 4 rows of 20mm circles with a dot dead centre to locate a center punch for the drill. If the circles could be roughly apart like below it would be awesome mate. No hurry ok and if its too hard ....shelve it. 3 Quote Link to comment Share on other sites More sharing options...
Imis Twohofon,SASS # 46646 Posted May 17 Share Posted May 17 Check with Diamond Jake, he makes SG shell racks from wood. As for the other pattern- "I was in Montreal at the time." Imis Quote Link to comment Share on other sites More sharing options...
Sedalia Dave Posted May 17 Share Posted May 17 (edited) 11 hours ago, Buckshot Bear said: Thanks Dave, mate I'm sorry that I forgot it was you....that file is precious to me and I've printed and used many now. I need something like this below that I found on the web. What I'm trying to do is cut the brass heads of sixteen (16) shotshells and put them into drilled holes in a piece of square stained and routed timber and then varnish it all. The drilled holes will be 20mm, so I would dearly like (if possible and not too much of a hassle) 4 x 4 rows of 20mm circles with a dot dead centre to locate a center punch for the drill. If the circles could be roughly apart like below it would be awesome mate. No hurry ok and if its too hard ....shelve it. Not a problem my friend. How much space between the rim of the shells? Edited May 17 by Sedalia Dave 1 1 Quote Link to comment Share on other sites More sharing options...
Texas Maverick Posted May 17 Share Posted May 17 18 hours ago, Sedalia Dave said: Dang, I guess I'll have to fess up and take responsibility for being a nice guy. This sure is ruining my bad reputation. TM 1 2 1 Quote Link to comment Share on other sites More sharing options...
One Gun Jimmy Posted May 17 Share Posted May 17 (edited) Edited May 17 by One Gun Jimmy 1 1 Quote Link to comment Share on other sites More sharing options...
One Gun Jimmy Posted May 17 Share Posted May 17 Save and print, as long as the line on the right side measures 3 15/16 it should be the scale you requested. 1 1 Quote Link to comment Share on other sites More sharing options...
Buckshot Bear Posted May 18 Author Share Posted May 18 17 hours ago, Sedalia Dave said: Not a problem my friend. How much space between the rim of the shells? Sorry for the late reply Dave, just got home from an IPSC match. I know 12°C (53.°F) isn't cold to a lot of you fella's but OMG it was freezing!!!!!!!!!!!! 3mm would be perfect. 1 1 Quote Link to comment Share on other sites More sharing options...
Buckshot Bear Posted May 23 Author Share Posted May 23 @Sedalia Dave Thank you for the file Dave......worked out well mate. Jenorado wanted it for our 'Single Action' tack room Super appreciated !!! 2 2 Quote Link to comment Share on other sites More sharing options...
Eyesa Horg Posted May 23 Share Posted May 23 Nice job,mate. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.