Long Hunter Ruger Spring Sets

[Long Hunter SASS #20389L]

Howdy,

We have changed our Ruger spring sets as of this notice. The kits include a 15 and 17 pound hammer spring, an increase cross pin cylinder latch spring and a 32 and 40 ounce trigger spring. On the new Vaqueros and Blackhawks coming in, the 32oz spring will give you approximately a 1.75lb trigger pull. The 40oz will give you a 2.5lb trigger pull.

 

If you have an older Vaquero with the internal lock, cut two coils off the standard length hammer springs to equal their weight.

 

https://www.longhunt.com/storelh/index.php?route=product/product&path=88_94&product_id=454

 

Thanks,

Long Hunter

[Palmetto Traveller]

Do you still have any of the 15lb shorter springs that used to be included in the set?

[Long Hunter SASS #20389L]

No sir,

You can cut two coils from the standard length spring to achieve the same tension with the internal lock.

 

If someone orders the spring set and wants the shorter springs, you can put that in the comment section of the order and we'll cut them and turn the ends for you.

 

Thank you,

Long Hunter