Jump to content
SASS Wire Forum

Guns and Stuff at EOT. Part 1


Recommended Posts

Thursday night is swap meet night at EOT.  This year I have decided not to try and haul a bunch of stuff to the swap meet.  So I am posting here.  If anyone wants an item or has more questions you can PM me.  If something is sold I will arrange to meet at EOT. I will also be at the swap meet wandering around and can bring items in my car.  I just won’t have a table.  I do not take Zelle, Venmo, BitCoin or any of that stuff.  Just American money.

 

1.  Pair Hickok Open Tops.  Arbors adjusted, tuned, hammer spurs re-contoured just a bit.  White handled tool I made to knock out empties.  It is sized to fit into a .38 belt loop.  $800.00 SOLD

 

DSC_0008.thumb.jpeg.bd603aa157f40b9d3a2f746b6fed70b3.jpeg

 

2.  Pair Uberti Mason Conversions.  Arbors adjusted, coil spring hand conversion, hammer over travel stops, hammers re-contoured, ejectors rebuilt (brass bushings and smaller ejector rods) to work properly with .38 cartridges.  $800.00  SOLD

 

DSC_0005.thumb.jpeg.ea6c04c2f84f10b5b179d98dfd460b8a.jpeg

 

DSC_0006.thumb.jpeg.3d2d69a73bc9839cdbab3438dbc6f0a8.jpeg

 

3.  IAC SxS Outside Hammer Shotgun.  Model 1887/99.  Locks have coil mainsprings that have been replaced with lighter ones.  Original springs included.  $325.00  SOLD

 

DSC_0011.thumb.jpeg.393581d43699ea1eb89609c0734281f7.jpeg

 

4.  AWA .44-40 Lightning.  20” Carbine.  $750.00  SOLD

 

DSC_0014.thumb.jpeg.87f03544fefdb77b4b8e95051c7fb24f.jpeg

 

5.  Uberti Lightning .45 Colt.  26” barrel Carbine!  (Note Uberti’s have no slide lock.  Some people have a hard time not constantly pulling back on the pump slide.)  $750.00

 

DSC_0015.thumb.jpeg.72be483560ea30e653d8b0751f7714c2.jpeg

 

DSC_0017.thumb.jpeg.dfee3ba69f792234af22cece102d1536.jpeg

 

6.  Marlin 1895 .45-70 Collector Grade.  First year production Marlin 1895 with two digit serial number.  First year production had no cross bolt safety, Ballard rifling and a very mild crescent butt plate.  Original hang tag still attached to lever.  $1,500.00

 

DSC_0007.thumb.jpeg.ccb6c14018b746c1fe9a3c702fb86734.jpeg

 

472476286_DSC_0008(1).thumb.jpeg.834f84a821dd84fe6e0e7b8b3cb0807c.jpeg

 

DSC_0009.thumb.jpeg.57c7ff2ea8cf305977488b1d4e8acfeb.jpeg

 

Link to comment
Share on other sites

Good Afternoon Larsen:

If you decide to ship, I'd like to buy the Hickock & Richard Mason Conversions.

 

Pair Hickok Open Tops.  Arbors adjusted, tuned, hammer spurs re-contoured just a bit.  White handled tool I made to knock out empties.  It is sized to fit into a .38 belt loop.  $800.00

 

Pair Uberti Mason Conversions.  Arbors adjusted, coil spring hand conversion, hammer over travel stops, hammers re-contoured, ejectors rebuilt (brass bushings and smaller ejector rods) to work properly with .38 cartridges.  $800.00

Link to comment
Share on other sites

6 hours ago, Larsen E. Pettifogger, SASS #32933 said:

Thursday night is swap meet night at EOT.  This year I have decided not to try and haul a bunch of stuff to the swap meet.  So I am posting here.  If anyone wants an item or has more questions you can PM me.  If something is sold I will arrange to meet at EOT. I will also be at the swap meet wandering around and can bring items in my car.  I just won’t have a table.  I do not take Zelle, Venmo, BitCoin or any of that stuff.  Just American money.

 

1.  Pair Hickok Open Tops.  Arbors adjusted, tuned, hammer spurs re-contoured just a bit.  White handled tool I made to knock out empties.  It is sized to fit into a .38 belt loop.  $800.00

 

DSC_0008.thumb.jpeg.bd603aa157f40b9d3a2f746b6fed70b3.jpeg

 

2.  Pair Uberti Mason Conversions.  Arbors adjusted, coil spring hand conversion, hammer over travel stops, hammers re-contoured, ejectors rebuilt (brass bushings and smaller ejector rods) to work properly with .38 cartridges.  $800.00

 

DSC_0005.thumb.jpeg.ea6c04c2f84f10b5b179d98dfd460b8a.jpeg

 

DSC_0006.thumb.jpeg.3d2d69a73bc9839cdbab3438dbc6f0a8.jpeg

 

3.  IAC SxS Outside Hammer Shotgun.  Model 1887/99.  Locks have coil mainsprings that have been replaced with lighter ones.  Original springs included.  $325.00

 

DSC_0011.thumb.jpeg.393581d43699ea1eb89609c0734281f7.jpeg

 

4.  AWA .44-40 Lightning.  20” Carbine.  $750.00  SOLD

 

DSC_0014.thumb.jpeg.87f03544fefdb77b4b8e95051c7fb24f.jpeg

 

5.  Uberti Lightning .45 Colt.  26” barrel Carbine!  (Note Uberti’s have no slide lock.  Some people have a hard time not constantly pulling back on the pump slide.)  $750.00

 

DSC_0015.thumb.jpeg.72be483560ea30e653d8b0751f7714c2.jpeg

 

DSC_0017.thumb.jpeg.dfee3ba69f792234af22cece102d1536.jpeg

 

6.  Marlin 1895 .45-70 Collector Grade.  First year production Marlin 1895 with two digit serial number.  First year production had no cross bolt safety, Ballard rifling and a very mild crescent butt plate.  Original hang tag still attached to lever.  $1,500.00

 

DSC_0007.thumb.jpeg.ccb6c14018b746c1fe9a3c702fb86734.jpeg

 

472476286_DSC_0008(1).thumb.jpeg.834f84a821dd84fe6e0e7b8b3cb0807c.jpeg

 

DSC_0009.thumb.jpeg.57c7ff2ea8cf305977488b1d4e8acfeb.jpeg

 

That's the lowest B0 serial number I've seen on a 1895 Marlin.  The B0 series were made in 1972.  I have one with the B0 serial number, no where near as nice as this one.

 

Link to comment
Share on other sites

Hi Larsen:

Just sent you a proposal regarding the Uberti OTs & R-Ms

Check yer messages.

Thanks

--Dawg

 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.