Jump to content
SASS Wire Forum

WTB 50 Alaskan Brass


Recommended Posts

Greetings Everyone,

The title says it all looking for maybe 10 or a few more. Once fired is okay, heck several times fired is ok as long as it’s not cracked.

 

Carbinecasey #4469

Link to comment
Share on other sites

  • 2 weeks later...
19 hours ago, Gerald A Trick said:

Casey I believe I have some new brass I’ll check the trailer in the morning 

Sounds good, thank you.

Link to comment
Share on other sites

50 Alaskan?

 

Now THAT'S a monster!

 

:D

Link to comment
Share on other sites

I know you were asking about .50 Alaskan brass, and I was not familiar with this cartridge; So, I did a little research and found some loaded ammunition from Buffalo Bore:   https://www.buffalobore.com/index.php?l=product_list&c=39   SB

Link to comment
Share on other sites

On 12/27/2022 at 8:18 PM, Gerald A Trick said:

Casey I looked found none but cold here today didn't look as long as I could have   sure that there was some will keep looking 

Sir I totally understand If you happen to come across a few let me know I have some 50/70’s. I reloading an old Remington Rolling Block in 12.17x44R.

Link to comment
Share on other sites

That is the easy way to get there.  The harder way is to start with 348 winchester brass (which is where the .50 Alaskan brass cartridge originated) and expand the neck and fireform.  All the brass I use was made this way, luckily I was able to get them already fireformed.  I think if I need more I will also go the .50 Alaskan way.

Link to comment
Share on other sites

  • 5 weeks later...

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.