Rye Miles #13621 Posted November 23, 2022 Share Posted November 23, 2022 I know this has been discussed but does anyone actually have one? Question #1.Can you find lead 9mm ammo? I'd like to get one not necessarily for CAS but just to plink with. although I would use it occasionally at a match. Question #2 are those of you that have one reloading?? Thanks Link to comment Share on other sites More sharing options...
Chief Rick Posted November 23, 2022 Share Posted November 23, 2022 I've seen and handled one in person, but not fired it. It felt just like a standard single-action revolver. Seemed to be timed well with crisp clicks. A local shooter has one and enjoys it. I am not aware if he's used it in a match. Link to comment Share on other sites More sharing options...
Tex Jones, SASS 2263 Posted November 23, 2022 Share Posted November 23, 2022 Just learned of this. I wonder if the cylinder could be swapped out for one in 38 spl. As far as reloading goes, I guess that 38 spl lead bullets could be used instead of the normal jacketed ones. Link to comment Share on other sites More sharing options...
July Smith Posted November 23, 2022 Share Posted November 23, 2022 While it might exist, I have never seen cast/coated bullets loaded in factory 9mm ammo. In order to have SASS legal ammo one would pretty much have to reload. I can understand the appeal to have a single action revolver in 9mm if you already happen to have a bunch of 9mm semi-autos but for SASS use its pretty hard to beat the 38/357s. Link to comment Share on other sites More sharing options...
Rye Miles #13621 Posted November 23, 2022 Author Share Posted November 23, 2022 18 minutes ago, July Smith said: While it might exist, I have never seen cast/coated bullets loaded in factory 9mm ammo. In order to have SASS legal ammo one would pretty much have to reload. I can understand the appeal to have a single action revolver in 9mm if you already happen to have a bunch of 9mm semi-autos but for SASS use its pretty hard to beat the 38/357s. I have 4 Colts in .357 and I load .38's. I'm just considering a 9mm for fun and maybe I'd bring it to a cowboy shoot if I could get lead 9mm. I have one 9mm Semi auto and I don't reload 9mm. If I can't find lead 9mm ammo I'd just use it for fun fun at the range. Link to comment Share on other sites More sharing options...
Two Dot, 14911 Posted November 23, 2022 Share Posted November 23, 2022 Unless I’m mistaken federal make “syntech” ammo that is coated lead. Link to comment Share on other sites More sharing options...
Totes Magoats Posted November 23, 2022 Share Posted November 23, 2022 I reloaded for the few Pro Steel matches I have shot using 9mm in my PC Carbine rifle and CZ Parrot. I get all my bullets from Precision bullets and just roll my own. Totes Link to comment Share on other sites More sharing options...
Canoga Joe Posted November 23, 2022 Share Posted November 23, 2022 20 minutes ago, Two Dot, 14911 said: Unless I’m mistaken federal make “syntech” ammo that is coated lead. This https://www.luckygunner.com/handgun/9mm-ammo?jacket_type=2908 While not the least expensive 9mm starting at $0.40/rd for 115 gr., you.can find it on sale sometimes. Still, much cheaper than factory .38’s. Given the current cost/scarcity of reloading components, I prefer to buy 9mm and reload .38. Link to comment Share on other sites More sharing options...
Cibola Al Posted November 23, 2022 Share Posted November 23, 2022 Bang and Clang sells loaded lead 9mm ammo for “steel challenge” matches, so I suspect the velocity would be higher than what we like for cowboy matches. Since the velocity isn’t listed, you’d have to contact him to see what’s what. https://bangandclangllc.com/match-ammunition/ considerably more expensive than the Syntec ammo as well. Pietta does offer a dual cylinder model that is occasionally available, but I would do a little investigating since a few Pietta models have a transfer bar type safety. https://www.midwayusa.com/product/1025835974 Link to comment Share on other sites More sharing options...
Tulsey, SASS#11236 Posted November 23, 2022 Share Posted November 23, 2022 Ruger for years has had something in their manuals wanting you to shoot only jacketed ammo in their 9mm cylinders. They also say, like all most companies not to shoot reloads. I have shot 9mm lead in a 9mm cylinder of a Ruger Blackhawk convertible and 45 ACP lead in a Ruger Blackhawk convertible . Below is the warning from the current manual. It says you could have some lead build up preventing 9mm ammo from going in the chamber. It sounds like the problem with lots of 38 Special fired and then trying to load 357. You might have to do more frequent 9 mm chamber cleaning. My Blackhawks worked just fine with lead, but you do need to keep the chambers clean. For someone with out a stockpile of 38 brass and all the free on the ground 9 mm brass shooting 9 mm in the revolvers could be attractive Notes on Revolvers Chambered for 9mm or 30 Carbine: Because 9mmcartridges are manufactured worldwide for use in pistols, revolvers, andsubmachine firearms, it is possible to encounter cartridges which, when fired,develop pierced primers. If this occurs, discontinue the use of the particularbrand or type of ammunition. The possibility of a pierced primer is anothercompelling reason why a shooter should always wear protective glasses to shieldhis eyes. Use only metal jacketed bullets in 9mm and 30 Carbine revolvers. Whena lead bullet is fired, its base expands and a ring of lead is shaved off anddeposited in the shoulder area of the chamber. A build-up of lead rings canprevent proper chambering of cartridges because 9mm and 30 Carbine cartridgemouths seat on the chamber shoulders. Link to comment Share on other sites More sharing options...
Rye Miles #13621 Posted November 23, 2022 Author Share Posted November 23, 2022 Thanks for all the responses, interesting info...............keep 'em coming!! Scarlett Darlin' has coated 9mm bullets, but I'd have to get dies etc. Link to comment Share on other sites More sharing options...
H. K. Uriah, SASS #74619 Posted November 23, 2022 Share Posted November 23, 2022 Lead bullets for the 9mm do exist. Off the top of my head, I believe they are .355" in diameter. I loaded up a buncha these bullets in 9mm for use in my Luger back in the day when you could use those in Wild Bunch. I'd have to look up the exact load I used. Link to comment Share on other sites More sharing options...
Ranger Dan Posted November 23, 2022 Share Posted November 23, 2022 SNS Casting has a good selection of 9mm coated bullets: Coated Bullets - 9mm - snscasting I've used their 45 bullets for Wild Bunch, good bullets. Link to comment Share on other sites More sharing options...
Slow Mo Dern Posted November 23, 2022 Share Posted November 23, 2022 PM sent, Rye. Link to comment Share on other sites More sharing options...
Cholla Posted November 23, 2022 Share Posted November 23, 2022 Would they not be like C45S rounds but for a 9mm? Seems like it would save powder and have better ignition vs longer cases when working up reduced velocity loads. Link to comment Share on other sites More sharing options...
Three Foot Johnson Posted November 23, 2022 Share Posted November 23, 2022 8 hours ago, Tex Jones, SASS 2263 said: Just learned of this. I wonder if the cylinder could be swapped out for one in 38 spl. As far as reloading goes, I guess that 38 spl lead bullets could be used instead of the normal jacketed ones. I would say, "That depends". No one seems to know for sure if the barrels are .355" or .357". If they're .355", I would expect the manufacturer would make some sort of modification to prevent a .38/357 cylinder from being installed. I have an email in to Taylors about it. (EDIT) Well, that wasn't any help, but I guess he answered my question 100% accurately, as asked. Link to comment Share on other sites More sharing options...
Tex Jones, SASS 2263 Posted November 23, 2022 Share Posted November 23, 2022 Oh boy. Is that a skinny 9? Link to comment Share on other sites More sharing options...
Three Foot Johnson Posted November 23, 2022 Share Posted November 23, 2022 3 minutes ago, Tex Jones, SASS 2263 said: Oh boy. Is that a skinny 9? Bore diameter is land to land - groove diameter is what I want an answer for. But, in all fairness, I asked for "bore diameter", so... Link to comment Share on other sites More sharing options...
Smokin Gator SASS #29736 Posted November 24, 2022 Share Posted November 24, 2022 ICORE shooters are shooting a lot of the S&W 929 9mm revolvers. A lot of them have found they need to experiment with 9mm bullets and 38 special bullets to get the best performance/accuracy out of their guns. It's a similar situation to 44-40 guns with some doing best with .427 bullets and others with .429- 430 bullets. Link to comment Share on other sites More sharing options...
Hard Money Posted November 24, 2022 Share Posted November 24, 2022 I can confirm that Taylor's sells .357 mag conversion cylinders for the TC9, though they aren't currently in stock. The intention is for them to be swapped though fitting might be required. Link to comment Share on other sites More sharing options...
Tulsey, SASS#11236 Posted November 24, 2022 Share Posted November 24, 2022 38 colt short is a little smaller capacity than 9mm Luger and 38 S&W is a little more if you are looking for a rimmed cartridge to compare data. As mentioned before, since a lot of SASS shooters are looking for light loads, the 9mm case would be very efficient. One thing to keep in mind if loading 9mm for SASS is to be sure to mark the cases or box so you don't try to shoot them in a normal 9mm pistol. Mostly likely they will not function the slide, Generally the revolvers with two cylinders had the barrel size for the larger caliber. 22 mag, 357. At SASS ranges it really doesn't matter if the barrel is a little big and often testing finds accuracy is about the same. I have seen some people load off the shelf lead 9mm 147 bullets in 38 cases to get the right over all length to work in some 357 rifles and accuracy was plenty good for SASS target ranges. At common distances regular 358 bullets give about the same accuracy in most 38 S&W revolvers even though they are supposed to be .360. I suspect the Taylor revolvers will shoot just fine with plain lead 9mm bullets and if someone runs a test you might find the barrel is 357 or 358. Link to comment Share on other sites More sharing options...
Sinola Kid Posted November 24, 2022 Share Posted November 24, 2022 Rye, ammunition depot sells the lead polymer coated ammo. $333 a 1000. I have purchased from them before. Give it a shot. Link to comment Share on other sites More sharing options...
Rye Miles #13621 Posted November 24, 2022 Author Share Posted November 24, 2022 12 minutes ago, Sinola Kid said: Rye, ammunition depot sells the lead polymer coated ammo. $333 a 1000. I have purchased from them before. Give it a shot. I will when I get the TC9, I have it on order. Link to comment Share on other sites More sharing options...
Barbwire Bill, SASS #661 Posted November 24, 2022 Share Posted November 24, 2022 Is the Taylor’s action a true 4 click like a colt or does it have some hammer safety added? Would like a 9mm for plinking but with a traditional action. Thanks Link to comment Share on other sites More sharing options...
Abilene, SASS # 27489 Posted November 24, 2022 Share Posted November 24, 2022 8 hours ago, Rye Miles #13621 said: I will when I get the TC9, I have it on order. Did you order the all-blued gun with Army grip, or case-colored gun with standard grip? Link to comment Share on other sites More sharing options...
Abilene, SASS # 27489 Posted November 24, 2022 Share Posted November 24, 2022 1 hour ago, Barbwire Bill, SASS #661 said: Is the Taylor’s action a true 4 click like a colt or does it have some hammer safety added? Would like a 9mm for plinking but with a traditional action. Thanks That is a good question. In Taylor's pictures, the all-blued version shows with a base pin fully inserted. The case-colored version shows a two-position base pin in the forward position. Uberti's guns with the firing pin safety hammer come with a one-position base pin. But also, the trigger position on both pictures is somewhat forward, which looks like the Uberti safety system. So who knows? Link to comment Share on other sites More sharing options...
H. K. Uriah, SASS #74619 Posted November 24, 2022 Share Posted November 24, 2022 Thinking about it, if you have a .38 Special revolver, rather than get a cylinder for 9mm, which would use undersized bullets for the barrel, just run .38 Short Colts which can be loaded with the standard .358" lead bullets. That's what I run in my derringer, with excellent results. Link to comment Share on other sites More sharing options...
Abilene, SASS # 27489 Posted November 24, 2022 Share Posted November 24, 2022 On a related note, If someone is going to handload 9mm for CAS, Academy currently has the Bond Arms Roughneck in 9mm for $229. Link to comment Share on other sites More sharing options...
Rye Miles #13621 Posted November 25, 2022 Author Share Posted November 25, 2022 It’s a Pietta and has 4 clicks Link to comment Share on other sites More sharing options...
Rye Miles #13621 Posted November 25, 2022 Author Share Posted November 25, 2022 18 hours ago, Barbwire Bill, SASS #661 said: Is the Taylor’s action a true 4 click like a colt or does it have some hammer safety added? Would like a 9mm for plinking but with a traditional action. Thanks It’s made by Pietta so it has 4 clicks Link to comment Share on other sites More sharing options...
Three Foot Johnson Posted November 30, 2022 Share Posted November 30, 2022 I got an answer back from Taylor's this morning about the groove diameter, they are .357". Link to comment Share on other sites More sharing options...
Rye Miles #13621 Posted November 30, 2022 Author Share Posted November 30, 2022 On 11/23/2022 at 12:41 PM, H. K. Uriah, SASS #74619 said: Lead bullets for the 9mm do exist. Off the top of my head, I believe they are .355" in diameter. I loaded up a buncha these bullets in 9mm for use in my Luger back in the day when you could use those in Wild Bunch. I'd have to look up the exact load I used. Bullets yea not loaded ammo ! Link to comment Share on other sites More sharing options...
Three Foot Johnson Posted November 30, 2022 Share Posted November 30, 2022 Link to comment Share on other sites More sharing options...
Sedalia Dave Posted November 30, 2022 Share Posted November 30, 2022 7 minutes ago, Three Foot Johnson said: Where did you find those? Link to comment Share on other sites More sharing options...
Three Foot Johnson Posted November 30, 2022 Share Posted November 30, 2022 Currently sold out, but the stuff appears to be made anyway. https://www.sportsmansguide.com/product/index/ultramax-9mm-luger-rnl-125-grain-500-rounds-remanufactured?a=1593341 This one looks kind of sketchy, who knows. https://bullseyeshootingsupplies.com/product/9mm-125-round-nose-lead/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.