Jump to content
SASS Wire Forum

Clay Dot for cowboy loads in 12Ga


Waco Jim

Recommended Posts

Just aquired a jug of Clay Dot and I'm wondering what load I should use for 12Ga 7/8 oz shot.  Not much info on the Alliant website.

Link to comment
Share on other sites

14gr. Clay Dot, grey Claybuster wad, 7/8 oz. #8 shot. AA or STS hull.

Link to comment
Share on other sites

Just now, Nutmeg Ryder, SASS # 74966 said:

I use 14 grains of Clay Dot, with the grey Claybuster wad, and 3/4 oz shot. (used the same powder charge with 7/8ths as well) 

 

Works for what we need. 

 

Ya just beat me. Will we be seeing you this weekend at the Boil?

Link to comment
Share on other sites

We use a MEC #23 bushing. Throws around 13.3 grains, 1oz of shot.

 

Wife likes that load also.

BUT.

I have ordered a #22 bushing. I know that will still more than do the job.

And be a little easier for the wife. 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.