Marlin Buckhorn,SASS 51727 Posted September 13, 2022 Share Posted September 13, 2022 I know the topic has been discussed many times before. Looking for the name of a machine shop that does it. Common and well known name, just can't remember it. Thanks for your help, Marlin Link to comment Share on other sites More sharing options...
Larsen E. Pettifogger, SASS #32933 Posted September 13, 2022 Share Posted September 13, 2022 You probably do not need or want a machine shop. You need to find a gunsmith that can ream the chambers. .327 is not terribly popular so you might have to rent a reamer and take it to a gunsmith as it would not be worthwhile for most smith's to buy a reamer for a one-off job in an unpopular caliber. https://4drentals.com/product/327-federal-finish-reamer/ Link to comment Share on other sites More sharing options...
Garrison Joe, SASS #60708 Posted September 13, 2022 Share Posted September 13, 2022 You might be thinking of Alan Harton in Texas. Does tons of special single-action work. (713)907-6031 is Alan's shop number. good luck, GJ Link to comment Share on other sites More sharing options...
Warden Callaway Posted September 13, 2022 Share Posted September 13, 2022 DIY project. Rent a chamber reamer, a little oil, a T tapping wrench and a few minutes done. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.