Wild Willi Posted August 24, 2022 Share Posted August 24, 2022 I Have added a Reeder Special Gun So you can see his custom grip frame on his gun! Here are two pair of Sambar Stag Grips with Grip Frames for the Ruger Vaquero or Blackhawk or Single Six.. I got these on some guns years ago. I converted the guns to Birdshead so these are the parts That are left. The guns were Stainless and these Grip Frames are Polished Aluminum. Surprisingly these grip frames ballanced the guns better than the steel. The grips and grip frames have been made to look like Reader Grip frames. They feel like Bisleys in the hand I would say they are slightly thinner than factory grips. $390 Per set Grips and Grip frame. A fellow emailed me saying some folks might not know you have to add these grip frames to your gun to use the grips, Unless You fit your grip frames to these grips. Link to comment Share on other sites More sharing options...
jeeper90 Posted August 24, 2022 Share Posted August 24, 2022 Sent you a DM Link to comment Share on other sites More sharing options...
Wild Willi Posted August 28, 2022 Author Share Posted August 28, 2022 Still for sale Link to comment Share on other sites More sharing options...
BandAid Posted August 30, 2022 Share Posted August 30, 2022 Will these fit a New Model Vaquero? Link to comment Share on other sites More sharing options...
jeeper90 Posted August 30, 2022 Share Posted August 30, 2022 This might answer your question. Smokewagon Grampies Link to comment Share on other sites More sharing options...
Sgt Duncan Posted August 30, 2022 Share Posted August 30, 2022 59 minutes ago, BandAid said: Will these fit a New Model Vaquero? Those polished aluminum grip frames should swap out on your New Vaqueros But if you are asking if you can simply put these grip panels on your grip frames, I don’t think so. It says right in the main description up top that “the grips and grip frames have been made to look like Reeder Grip Frames” and feel like Bisleys. If you look closely at the pictures, a fair amount of material has been removed from the back of the grip frames. The panels have been fit to those grip frames and probably won’t fit any other unmodified grip frames. I love Sambar Stag material for grips and those are some nice looking panels. I just think you will need to use the aluminum grip frames they have been mated to. Link to comment Share on other sites More sharing options...
BandAid Posted August 30, 2022 Share Posted August 30, 2022 Thanks, I have NMV, and have been hunting for Bisley grip frames. I already have all the internals for the swap, just need the frames and the grip panels! Sent a DM! Link to comment Share on other sites More sharing options...
Wild Willi Posted September 1, 2022 Author Share Posted September 1, 2022 Yes they will fit NEW model Vaquero! Link to comment Share on other sites More sharing options...
Hawg Runner, SASS #61139 Posted September 1, 2022 Share Posted September 1, 2022 Them sure are sweet. Link to comment Share on other sites More sharing options...
Wild Willi Posted September 10, 2022 Author Share Posted September 10, 2022 See New Pics On the gun Link to comment Share on other sites More sharing options...
Wild Willi Posted September 19, 2022 Author Share Posted September 19, 2022 5 Screws and you have a new gun , thats all it takes no new hammer or trigger, but if you want a SBH hammer she will fit right in! Link to comment Share on other sites More sharing options...
Wild Willi Posted September 22, 2022 Author Share Posted September 22, 2022 Btt Link to comment Share on other sites More sharing options...
Wild Willi Posted September 26, 2022 Author Share Posted September 26, 2022 Reduced Price Link to comment Share on other sites More sharing options...
Wild Willi Posted October 2, 2022 Author Share Posted October 2, 2022 Grips alone should be more than this price! Link to comment Share on other sites More sharing options...
jeeper90 Posted October 2, 2022 Share Posted October 2, 2022 6 hours ago, Wild Willi said: Grips alone should be more than this price! Can you measure the grips as described above using a 3"x3" square? Which grip panels are these? Thanks Link to comment Share on other sites More sharing options...
Wild Willi Posted October 2, 2022 Author Share Posted October 2, 2022 There is no confusion here these frames are from old model blackhawks they have had the bosses in front of the grips so they will now fit New Model Or Old Model Vaqueros or BlackHawks. These folks that want to make this an issue must be bored! if you are unsure tell me what gun you want to put them on and I will tell you if they fit! Link to comment Share on other sites More sharing options...
jeeper90 Posted October 2, 2022 Share Posted October 2, 2022 I have ruger six with the long grips i believe they are xr3-red grips. Link to comment Share on other sites More sharing options...
Wild Willi Posted October 3, 2022 Author Share Posted October 3, 2022 Correct these will fit. Even if you had the small grip they will fit Link to comment Share on other sites More sharing options...
Wild Willi Posted October 3, 2022 Author Share Posted October 3, 2022 Reeder Special Pic added! Link to comment Share on other sites More sharing options...
Wild Willi Posted October 11, 2022 Author Share Posted October 11, 2022 Btt Link to comment Share on other sites More sharing options...
Wild Willi Posted October 19, 2022 Author Share Posted October 19, 2022 UP Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.