Jump to content
SASS Wire Forum

FS Two Pair of Sambar Stag Grips and Grip Frames. REDUCED PRICE


Wild Willi

Recommended Posts

I Have added a Reeder Special Gun So you can see his custom grip frame on his gun!

Here are two pair of Sambar Stag Grips with Grip Frames for the Ruger Vaquero or Blackhawk or Single Six.. I got these on some guns years ago.  I converted the guns to Birdshead so these are the parts That are left.  The guns were Stainless and these Grip Frames are Polished Aluminum. Surprisingly these grip frames ballanced the guns better than the steel.  The grips and grip frames have been made to look like Reader Grip frames.  They feel like Bisleys in the hand  I would say they are slightly thinner than factory grips.  $390 Per set Grips and Grip frame.

A fellow emailed me saying some folks might not know you have to add these grip frames to your gun to use the grips, Unless You fit your grip frames to these grips.

 

1.jpg.cc66a52ca28e7024a459134d64d95a99.jpg

 

2.jpg.a35a64aade0d4a58f45008cc7999c0a9.jpg

1.jpg.b32d4fc2afb899987a3dea1a0db568bf.jpg2.jpg.6619436c7bac3c2038e6cf3fb95b8716.jpg

410503899.jpg.2138674a13e2d2a3ef703d65b0d0e716.jpgpix329529484.jpg.b9b2d200cf2add6cf71ca97e6cb6dda3.jpg410503944.jpg.d0a58d02c522aa68124324853173802f.jpg410503943.jpg.ecb28f6da6fe074f40ddf79dcc23ae3b.jpg

1166279378_ReederSpecial.thumb.jpg.a18fe06dc0eef5ee97baee6d5ba87673.jpg

Link to comment
Share on other sites

59 minutes ago, BandAid said:

Will these fit a New Model Vaquero?

Those polished aluminum grip frames should swap out on your New Vaqueros

But if you are asking if you can simply put these grip panels on your grip frames, I don’t think so. It says right in the main description up top that “the grips and grip frames have been made to look like Reeder Grip Frames” and feel like Bisleys. If you look closely at the pictures, a fair amount of material has been removed from the back of the grip frames. The panels have been fit to those grip frames and probably won’t fit any other unmodified grip frames.

I love Sambar Stag material for grips and those are some nice looking panels. I just think you will need to use the aluminum grip frames they have been mated to.

Link to comment
Share on other sites

Thanks, I have NMV, and have been hunting for Bisley grip frames. I already have all the internals for the swap, just need the frames and the grip panels! Sent a DM!

Link to comment
Share on other sites

  • 2 weeks later...
  • Wild Willi changed the title to FS Two Pair of Sambar Stag Grips and Grip Frames. REDUCED PRICE
6 hours ago, Wild Willi said:

Grips alone should be more than this price!

Can you measure the grips as described above using a 3"x3" square? Which grip panels are these? Thanks

Link to comment
Share on other sites

There is no confusion here these frames are from old model blackhawks they have had the bosses in front of the grips so they will now fit New Model Or Old Model Vaqueros or  BlackHawks.  These folks that want to make this an issue must be bored!

if you are unsure tell me what gun you want to put them on and I will tell you if they fit!

Link to comment
Share on other sites

  • 2 weeks later...

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.