Jump to content
SASS Wire Forum

Recommendation for slicking up Uberti El Patron Cattlemen


Ashley D Austin

Recommended Posts

Any recommendations on how to slick up Uberti El Patron Cattlemen?

Have already put in Wolf hammer and trigger springs but the action is still heavy.

Either how tos or a good gun smith who can slick them up.

Link to comment
Share on other sites

I've never thought Wolff springs were very light.  Try putting a washer, like a #10 stainless split washer, or a piece of leather with a hole punched in it, between the spring and the frontstrap.  This will lighten it a bit more.  I generally do this regardless of which spring I'm using.  If you ever have a problem with hard primers, it is easy to remove the washer for more power.  If you still want it lighter and smoother, there are plenty of 'smiths who can work on it.  Griner certainly but too many others to name.  Where are you?  If you can avoid shipping, that would be nice.

 

There is a list on the site here somewhere of gunsmiths.  Someone will link it.

Link to comment
Share on other sites

14 hours ago, Abilene, SASS # 27489 said:

...There is a list on the site here somewhere of gunsmiths.  Someone will link it.

okay, I guess "Someone" is me. ;)

 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.