Oak Ridge Regulator Posted August 3, 2022 Share Posted August 3, 2022 I’m not sure if this has been posted here before but I got tired of paying big bucks for Hornady, Lyman and RCBS case cleaning solution so on a friends recommendation I tried Simple Green HD, it’s made for metal and is purple not green, I used app 1/4 cup in a gallon of water, it wasn’t even enough to turn the water colored, 20 minutes on cold and wow what a difference, I did it a second time for 20 minutes but dident really need to, took off all the Trail Boss soot on my 45s and 38s, it did not however have any effect at all on the couple of black powder stained cases I threw in as a test, after about 2k cases I had to make a new batch but it’s a LOT cheaper and does a lot better job than the other cleaners I have tried, I’m going to try it heated next since the cleaner has that option, hope this helps others who use ultrasonic Link to comment Share on other sites More sharing options...
John E. Law Posted August 3, 2022 Share Posted August 3, 2022 I use the Simple Green Extreme. It's formulated for marine use. It's much more mild than regular SG. It's clear abs or works great. JEL Link to comment Share on other sites More sharing options...
Badlands Bob #61228 Posted August 4, 2022 Share Posted August 4, 2022 I have been contemplating getting one of those Ultrasonic cleaners lately. They work very well for completely disassembled gun parts. I'll still use my Frankford Arsenal wet tumbler for cleaning brass. Link to comment Share on other sites More sharing options...
John E. Law Posted August 4, 2022 Share Posted August 4, 2022 Bob, I have 2. The large Hornady and a $65 6"x5"x14" heated one from Amazon. Last night I cleaned an AR bolt in that one that had 600ish rounds on it. I set it at 45° C for 8 minutes. It came out looking like brand new. No scrubbing. Like I said I use Simple Green Extreme mixed with water. It works great. I rarely use the Hornady. It's large enough to do a complete AR but it's also a pain to fill, move, drain, etc. JEL Link to comment Share on other sites More sharing options...
Badlands Bob #61228 Posted August 4, 2022 Share Posted August 4, 2022 Harbor Freight has one that is 1.5L that I think will work for me. I just haven't gone and gotten it yet. I'm kinda waiting on one of those 25% off coupons. Link to comment Share on other sites More sharing options...
doc roy l. pain Posted August 4, 2022 Share Posted August 4, 2022 Does the Simple Green leave any type of residue on your brass? Also what’s the best way you’ve found to get the brass dry and moisture free. Link to comment Share on other sites More sharing options...
Oak Ridge Regulator Posted August 4, 2022 Author Share Posted August 4, 2022 I have done about 4k rounds of brass now and as far as I can tell once I rinse the brass in cold water there is no residue on the case inside or out, they are squeaky clean, I did use a heated solution on the second batch of cases and it does work a little better, I am also using distilled water because my well water has enough lime in it to make a drinking glass have a white film if you let it evaporate and that might cause an issue if I used it Link to comment Share on other sites More sharing options...
Bailey Creek,5759 Posted August 4, 2022 Share Posted August 4, 2022 I use water from my DeHumifier, to clean Brass. Link to comment Share on other sites More sharing options...
Griff Posted August 5, 2022 Share Posted August 5, 2022 21 hours ago, doc roy l. pain said: Does the Simple Green leave any type of residue on your brass? Also what’s the best way you’ve found to get the brass dry and moisture free. I haven't done the SG yet, (still have lots of The Hornady cleaner), but I found that about 45 minutes with the oven @ 170ºF with the brass spread out on a cookie sheet covered with a couple layers of paper towel, (brass on top of the paper towels). Link to comment Share on other sites More sharing options...
Eyesa Horg Posted August 5, 2022 Share Posted August 5, 2022 I dry mine in an old food dehydrator. Run it for an hour or so. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.