Geronimo Jim SASS # 21775 Posted August 2, 2022 Share Posted August 2, 2022 Never thought I would say that! I have had many machines over the years. Met Mike Dillon about a hundred years ago at a NRA convention. He was by himself with one machine mounted on a small table. That was it. Been a loyal customer ever since. Now to the present...,,need to relube my XL650. Always go to web site and follow their direction from a to z. Now it is gone......only a bunch of individual short on various parts of machine. Called Dillon no help. Ratz. Link to comment Share on other sites More sharing options...
The Original Lumpy Gritz Posted August 2, 2022 Share Posted August 2, 2022 Nut'n in the manual? If it moves in any way. Oil it..... Link to comment Share on other sites More sharing options...
Tarheel Doc Posted August 2, 2022 Share Posted August 2, 2022 They are having big problems with their web site. Link to comment Share on other sites More sharing options...
PowderRiverCowboy Posted August 2, 2022 Share Posted August 2, 2022 Link to comment Share on other sites More sharing options...
Garrison Joe, SASS #60708 Posted August 2, 2022 Share Posted August 2, 2022 Yep, they moved to their new location in North Scottsdale in early summer and have had phone and internet site problems since. good luck to them too, GJ Link to comment Share on other sites More sharing options...
Colorado Coffinmaker Posted August 2, 2022 Share Posted August 2, 2022 PLUS ONE for Garrison Joe!! Dillon isn't trying to annoy us. Just teething problems after their move. Hope they work thru it soon. Link to comment Share on other sites More sharing options...
Edward R S Canby, SASS#59971 Posted August 2, 2022 Share Posted August 2, 2022 I have a copy of the May 2007 Dillon 650 manual in pdf form. Send me a PM with your e-mail address and I will send it to you. Link to comment Share on other sites More sharing options...
John E. Law Posted August 2, 2022 Share Posted August 2, 2022 I literally just serviced my 2 650s using the online manual maybe 2 months ago. I will look for the link. JEL Link to comment Share on other sites More sharing options...
John E. Law Posted August 2, 2022 Share Posted August 2, 2022 Took 30 seconds. https://www.dillonprecision.com/media/manuals/dillon-xl650-manual-english.pdf and a whole bunch of videos https://www.dillonprecision.com/xl650-product-videos.html JEL Link to comment Share on other sites More sharing options...
Medicine Creek Johnny Posted August 2, 2022 Share Posted August 2, 2022 1 hour ago, Garrison Joe, SASS #60708 said: Yep, they moved to their new location in North Scottsdale in early summer and have had phone and internet site problems since. good luck to them too, GJ Did they move from the location at the north end of Scottsdale airport? Link to comment Share on other sites More sharing options...
Hells Comin Posted August 2, 2022 Share Posted August 2, 2022 They haven't moved I've been going to the same location for 18 years. Hells Comin Link to comment Share on other sites More sharing options...
Larsen E. Pettifogger, SASS #32933 Posted August 2, 2022 Share Posted August 2, 2022 I was just there a few days ago. They have not moved since they left the old site on Butherus Road years ago. Link to comment Share on other sites More sharing options...
Geronimo Jim SASS # 21775 Posted August 3, 2022 Author Share Posted August 3, 2022 Powder River Cowboy..................................THAT'S IT .............thanks......where did you get it? Link to comment Share on other sites More sharing options...
Howlin Mad Murdock SASS #4037 Posted August 3, 2022 Share Posted August 3, 2022 Being friends with a few Dillon employees, and getting pointers on operation, they always said the presses were designed to be lubed with 30w and axle grease. If it spins or rotates, oil it, if it slides, grease it. Link to comment Share on other sites More sharing options...
Griff Posted August 3, 2022 Share Posted August 3, 2022 1 hour ago, Howlin Mad Murdock SASS #4037 said: If it spins or rotates, oil it, if it slides, grease it. That's not correct, if it's sealed, grease it; if you can access it, oil it. Link to comment Share on other sites More sharing options...
Doc Shapiro Posted August 3, 2022 Share Posted August 3, 2022 9 hours ago, Geronimo Jim SASS # 21775 said: Never thought I would say that! I have had many machines over the years. Met Mike Dillon about a hundred years ago at a NRA convention. He was by himself with one machine mounted on a small table. That was it. Been a loyal customer ever since. Now to the present...,,need to relube my XL650. Always go to web site and follow their direction from a to z. Now it is gone......only a bunch of individual short on various parts of machine. Called Dillon no help. Ratz. Can't help with the issue, but how the hell are you? Haven't seen you since we moved out west! If you want to chat, shoot me a message. Doc Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.