Bluemound Cowboy Posted July 20, 2022 Share Posted July 20, 2022 I have a 73 Winchester uberti in 44-40 with 24 inch barrel. Probably shot a 100 rounds . It has aluminum carrier block lighter hammer and safety spring. I have the original box . I did bugger up the screws haven’t ordered the replacement set yet. $1400 plus shipping from my ffl to yours or would trade for a 73 with an 18 inch barrel in similar condition. Thanks for looking.$1300 Link to comment Share on other sites More sharing options...
McCandless Posted July 20, 2022 Share Posted July 20, 2022 If you're trying to get the same caliber just shorter barrel. Have one of our Cowboy Gunsmith's shorten the barrel, recrown and mag tube shorter. Link to comment Share on other sites More sharing options...
Bluemound Cowboy Posted July 20, 2022 Author Share Posted July 20, 2022 6 hours ago, McCandless said: If you're trying to get the same caliber just shorter barrel. Have one of our Cowboy Gunsmith's shorten the barrel, recrown and mag tube shorter. Have tried a couple gunsmiths. Haven’t found anyone willing to do it . Have any recommendations? Link to comment Share on other sites More sharing options...
Jack Spade Posted July 20, 2022 Share Posted July 20, 2022 Brandon McCumber in Carrollton is building custom rifles, he would be capable of doing the job. Also, I don't know if he is still doing gunsmith work but Larry Crow was in Bogard the last I knew. He did a lot of cowboy gun work some years back. Link to comment Share on other sites More sharing options...
Rex M Rugers #6621 Posted July 20, 2022 Share Posted July 20, 2022 Ken Griner (Griner Gunworks) of Bloomfield , N.M. did mine. It was the same model as yours , pistol grip , 24 " barrel. Because of where the magazine hanger is , it is cut at 19" ,but I couldn't be happier. Rex Link to comment Share on other sites More sharing options...
Bluemound Cowboy Posted July 20, 2022 Author Share Posted July 20, 2022 Larry was my first choice but his health hasn’t been very good lately. He did my revolvers not anything he can’t do. Link to comment Share on other sites More sharing options...
McCandless Posted July 20, 2022 Share Posted July 20, 2022 8 hours ago, Bluemound Cowboy said: Have tried a couple gunsmiths. Haven’t found anyone willing to do it . Have any recommendations? Yep, Three Cut has done Ubertis and Marlins for me. Excellent work. also, Tommy Barnett at Island Gunsmithing: https://islandgunsmith.com/ Link to comment Share on other sites More sharing options...
LawMan Mark, SASS #57095L Posted July 20, 2022 Share Posted July 20, 2022 10 hours ago, Bluemound Cowboy said: Have tried a couple gunsmiths. Haven’t found anyone willing to do it . Have any recommendations? Sgt. Eli at Victory Gun Works. He shortened my 24" to 21". Like it a lot better. His gunshop has a page on Facebook. Link to comment Share on other sites More sharing options...
Bluemound Cowboy Posted July 24, 2022 Author Share Posted July 24, 2022 Price reduced $1300 Link to comment Share on other sites More sharing options...
Burn Through Posted July 24, 2022 Share Posted July 24, 2022 what lawman said Sgt Eli great work Link to comment Share on other sites More sharing options...
Bluemound Cowboy Posted July 30, 2022 Author Share Posted July 30, 2022 . Link to comment Share on other sites More sharing options...
Bo Bender Posted August 3, 2022 Share Posted August 3, 2022 Will you do $1100 shipped? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.