Lunger Dan Posted June 12, 2022 Share Posted June 12, 2022 Right before the SHTF, I was lucky enough to grab up @ 1200 cci #10 caps. In individual blister packs of 100per tin. Got them at Sportsman's warehouse. Couple months ago, Id have about 3-4/100 from each tin that would have the ignition material just fall out like a little cake-not crumbly. Yesterday, I had about 60-70 caps loaded in my straight lines...and I swear, they were just falling out left and right....probably about 5 or six from each inline cap holder....some just from turning upside down It was humid, but caps were in shade... These things arent being jostled about. They sit in the climate controlled cave in an ammo box Anyone else having this happen? As rare as caps are now, it pains me to see this happening ( not to mention the FTF I got when one fell out as I was loading at the table and didnt notice) Anyone have a remedy? I was thinking maybe a touch of that nitro glue/ acetone mixture in each days before use-like they talk about for the DIY caps stuff. Link to comment Share on other sites More sharing options...
irish ike, SASS #43615 Posted June 12, 2022 Share Posted June 12, 2022 I once had some Remington No.10's fail to fire. Called them and they relpaced the entire batch I bought. Link to comment Share on other sites More sharing options...
Kid Rich Posted June 12, 2022 Share Posted June 12, 2022 I've had the little colored disc fall out of several different brands, but it may not be the primer material. I took some of them and put them on a flat piece of steel and banged them with a hammer and they do not detonate. The caps all still went off. kR Link to comment Share on other sites More sharing options...
Rip Snorter Posted June 12, 2022 Share Posted June 12, 2022 You might experiment put a few with a desiccant pack, a few more with a small humidor element and see what happens when you try to use them. Link to comment Share on other sites More sharing options...
Colorado Coffinmaker Posted June 12, 2022 Share Posted June 12, 2022 I'd suggest a missive to CCI outlining the problem. Good chance they will replace them. Link to comment Share on other sites More sharing options...
Lunger Dan Posted June 12, 2022 Author Share Posted June 12, 2022 2 hours ago, Kid Rich said: I've had the little colored disc fall out of several different brands, but it may not be the primer material. I took some of them and put them on a flat piece of steel and banged them with a hammer and they do not detonate. The caps all still went off. kR These fell out in 2 parts, the red paper disk as well as the grey "cake" leaving a perfectly clean shiny interior of a cap 52 minutes ago, Colorado Coffinmaker said: I'd suggest a missive to CCI outlining the problem. Good chance they will replace them. I guess that would be a good way to see if any existed at all ! Link to comment Share on other sites More sharing options...
Eyesa Horg Posted June 12, 2022 Share Posted June 12, 2022 I was given an old film canister full of unknown caps. I dumped a bunch out on a rag on my bench to measure. Had the same issue with almost half. Dumped all back in the canister, added oil and sent out with trash. Link to comment Share on other sites More sharing options...
Prairie Dawg, SASS #50329 Posted June 13, 2022 Share Posted June 13, 2022 In the old days, we used to put a drop of lacquer into each cap to waterproof it. With the way chemical formulas have changed, I don't know if that would still work, but I would try it with a few. --Dawg Link to comment Share on other sites More sharing options...
Tequila Shooter Posted June 13, 2022 Share Posted June 13, 2022 11 hours ago, Prairie Dawg, SASS #50329 said: In the old days, we used to put a drop of lacquer into each cap to waterproof it. With the way chemical formulas have changed, I don't know if that would still work, but I would try it with a few. --Dawg I was thinking the same thing but would a drop of nail polish work? What about water glass? Link to comment Share on other sites More sharing options...
Prairie Dawg, SASS #50329 Posted June 13, 2022 Share Posted June 13, 2022 TS: I would think a drop of clear nail polish would work too. I don't know about water glass, as it is a water-based solution, and might kill the priming compound. But, if you have water glass, try it with a few! --Dawg Link to comment Share on other sites More sharing options...
Colorado Coffinmaker Posted June 13, 2022 Share Posted June 13, 2022 Lemmie see here. A thousand or so "tins" of caps, in individual "blister packs." Opening all those packs, Opening all those tins, Orienting the little cups, slowly and carefully putting 1000 drops of something into itty bitty little cups in the hope they go bang - vs - a missive to CCI. Hummmmmmmmmmmmmmmm Link to comment Share on other sites More sharing options...
The Original Lumpy Gritz Posted June 13, 2022 Share Posted June 13, 2022 I would be call'n CCI Link to comment Share on other sites More sharing options...
Colorado Coffinmaker Posted June 14, 2022 Share Posted June 14, 2022 PLUS ONE for Me and Lumpy you betcha Link to comment Share on other sites More sharing options...
The Original Lumpy Gritz Posted June 14, 2022 Share Posted June 14, 2022 Hey OP, what did CCI have to say? Link to comment Share on other sites More sharing options...
Tequila Shooter Posted June 14, 2022 Share Posted June 14, 2022 I can hear it now Customer: I’ve got percussion caps that the insides are falling out. CCI: We’re sorry, we don’t know why, but we’ll gladly replace them when we start production again Customer: When will you be making them again? CCI: I’m sorry I don’t know when. Due to Covid we’re having a labor shortage and due to Putin all our production is making primers for our own ammunition. Although the above might be a joke I can almost hear the conversation playing out. Link to comment Share on other sites More sharing options...
Lunger Dan Posted June 14, 2022 Author Share Posted June 14, 2022 7 hours ago, The Original Lumpy Gritz said: Hey OP, what did CCI have to say? On 6/13/2022 at 12:56 PM, The Original Lumpy Gritz said: I would be call'n CCI The situation: There are no caps for sale anywhere-no bigbox store is getting any in, CCI is barely putting out primers for reloaders.... I dont believe for a minute, that a call to them about 2 year old(maybe more) primers would yield any type of satisfaction on my part. (I doubt it even in the good times). So, to be pro-active in a useful manner, what I have done is made a mixture of acetone and the nitrocellulose based Duco Cement and put a drop from the end of a swab stick in each cap. Waited 24 hours to dry . Tested , every one went off (I did 10) they passed the rattle in the tin as hard as possible test, and are even hotter than original manufacture. Oddly enough, another side affect was-out of every one-not a single one fell into 2 or more pieces after being hit-they came off/out as one unit. I am not about to sit down and do a thousand at a time..nor 100 at a time-but when I roll up my paper charges (35) prior to a shoot-I can certainly lay out 40 caps and super cement them..takes about 4 minutes. As far as the future tins I open and find any popped out-I will carefully try to re-construct them with the cakes found in the tin. Link to comment Share on other sites More sharing options...
Eyesa Horg Posted June 14, 2022 Share Posted June 14, 2022 What we have to go through these days just to play Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.