Bisley Joe Posted May 27, 2022 Share Posted May 27, 2022 How-DEE! Anyone shoot wax balls out of their cap and ball revolvers? Been thinking of using that for practice: maybe inside a big shed even (with a fan to pull out the smoke). I read somewhere that using just a percussion cap will make the wax stop in the barrel. Between 5-15 grains and they're accurate. Too much powder and they start losing accuracy. Something to experiment with I guess. Been thinking of doing the same with my 45 Colts, but the primer nonsense is putting that in the back-burner. The Cap and Ball Navies would let me practice pretty easily and economically using wax balls. Link to comment Share on other sites More sharing options...
Tequila Shooter Posted May 27, 2022 Share Posted May 27, 2022 You think primers are hard to get just try to find caps Link to comment Share on other sites More sharing options...
Eyesa Horg Posted May 27, 2022 Share Posted May 27, 2022 Especially since they aren't all the same. Link to comment Share on other sites More sharing options...
Attica Jack #23953 Posted May 27, 2022 Share Posted May 27, 2022 I have shot X-ring rubber bullets out of my 44 mag. Vaqueros, shoot extremely low because no recoil, they were primer powered. Link to comment Share on other sites More sharing options...
Widder, SASS #59054 Posted May 27, 2022 Share Posted May 27, 2022 Primer powered WAX bullets (no powder) in a cartridge pistol will zip that wax bullet out of the barrel faster than you can see it. Seriously. And the wax will disintegrate if you shoot it at bricks. I figured the same effect would occur with C&B pistols. RUBBER bullets will just about give the same performance, although from my personal experience, the wax bullets were more accurate within their effective ranges....... which would be 'close'. I never had a wax bullet recochet..... but I have a rubber bullet. If you decide to shoot these in a cartridge pistol, better performance is obtained by drilling open the flash hole. This will also help keep the primers from 'backing out' and making it difficult for your cylinder to rotate. On a side note: TOP BRASS use to make .45 brass that will use shotgun primers to power wax bullets. These things will amaze you........ and can be devastating on rats, pigeons, etc..... but they don't work very well on T-Rex or Sabre Tooth Tigers. Another interesting detail: Using the SHOT GUN PRIMERS only (no projectile) can also be devastating on a wasp nest at close range. The flame (or sparks) will singe the wings of the wasp and they normally fall to the ground unable to fly off. The concussion of the blast can also disorientate them. BUT..... be prepared with 2 revolvers, one in each hand, and shoot fast. ..........Widder Link to comment Share on other sites More sharing options...
Rip Snorter Posted May 27, 2022 Share Posted May 27, 2022 I gave a friend some of the shotgun primer cases and wax bullets. He occasionally uses a round to discourage aggressive livestock. I used them in fast draw and they were pretty good. Link to comment Share on other sites More sharing options...
Cusz M. Dutch SASS Life 55326 Posted May 27, 2022 Share Posted May 27, 2022 Have you considered the laser inserts? Link to comment Share on other sites More sharing options...
Rip Snorter Posted May 27, 2022 Share Posted May 27, 2022 Just remembered, Speer makes plastic bullets and cases, primer powered. Have some somewhere, but living in the country haven't used them in years. The bullets might work in percussion revolvers. Link to comment Share on other sites More sharing options...
Lucky R. K. Posted May 27, 2022 Share Posted May 27, 2022 I bought a kit a few years ago that consisted of 1,000 wax bullets and 50 pieces of 45 caliber of brass with the primer hole drilled out to accept a shotgun primer. Check out waxbullet.com if they are still there. At cowboy distances the setup works really well for a practice session. Lucky Link to comment Share on other sites More sharing options...
Bisley Joe Posted May 28, 2022 Author Share Posted May 28, 2022 Great info! Thank you! I ordered the cap maker from Sharpshooter 22 Reloader, along with the primer compound. Waiting to get the cap maker. I hear they are really swamped with orders. Once I get it, I'll see about doing a video on how they work and with the wax bullets as well. We should have my shed/workshop in a few months-about 20 feet long. That may be a good place to practice with the wax. There are plenty of free places to shoot where I live-outdoors, but we just got into a stage 2 fire ban and no shooting, campfires, etc. aloud for now. Link to comment Share on other sites More sharing options...
Widder, SASS #59054 Posted May 28, 2022 Share Posted May 28, 2022 Wear safety glasses. ..........Widder Link to comment Share on other sites More sharing options...
Bisley Joe Posted May 29, 2022 Author Share Posted May 29, 2022 1 hour ago, Widder, SASS #59054 said: Wear safety glasses. ..........Widder I always wear safety glasses, even when I shoot naked! Link to comment Share on other sites More sharing options...
Widder, SASS #59054 Posted May 29, 2022 Share Posted May 29, 2022 11 hours ago, Bisley Joe said: I always wear safety glasses, even when I shoot naked! In that case....... ya better wear safety jockeys. ..........Widder Link to comment Share on other sites More sharing options...
Bisley Joe Posted May 31, 2022 Author Share Posted May 31, 2022 On 5/29/2022 at 5:16 AM, Widder, SASS #59054 said: In that case....... ya better wear safety jockeys. ..........Widder LOL! Link to comment Share on other sites More sharing options...
Hardpan Curmudgeon SASS #8967 Posted June 2, 2022 Share Posted June 2, 2022 On 5/31/2022 at 9:16 AM, Bisley Joe said: LOL! Stainless Codpiece~!! ^ ^ ^ ^ Link to comment Share on other sites More sharing options...
Dirty Dan Dawkins Posted June 3, 2022 Share Posted June 3, 2022 I admire a man’s optimism. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.