Jump to content
SASS Wire Forum

Rugged Gear Gun Cart - Flag Mount


Chief Rick

Recommended Posts

Anybody flying a flag from a Rugged Gear Gun Cart?

 

What are you using to hold the flagpole?

 

I have a 12"x18" flag on a 3/8" diameter dowel (approximately 30" long).

 

I'd like to be able to attach the flag when we pull the cart out at a match and take it off before we stow the cart - and not use something that inhibits folding the cart.

Link to comment
Share on other sites

1 hour ago, Chief Rick said:

Anybody flying a flag from a Rugged Gear Gun Cart?

 

What are you using to hold the flagpole?

 

I have a 12"x18" flag on a 3/8" diameter dowel (approximately 30" long).

 

I'd like to be able to attach the flag when we pull the cart out at a match and take it off before we stow the cart - and not use something that inhibits folding the cart.

Do you carry a back-up rifle? Drop the dowel in the barrel. 

Link to comment
Share on other sites

 

I use an old flexible clip-on lamp with the lamp assembly and cord removed.

Slide the dowel in where the cord used to be.

Been doing this for years. Works great for me.

 

Marshal Stone

Link to comment
Share on other sites

On 5/19/2022 at 5:17 PM, Chief Rick said:

Anybody flying a flag from a Rugged Gear Gun Cart?

 

What are you using to hold the flagpole?

 

I have a 12"x18" flag on a 3/8" diameter dowel (approximately 30" long).

 

I'd like to be able to attach the flag when we pull the cart out at a match and take it off before we stow the cart - and not use something that inhibits folding the cart.

 

4 minutes ago, SHOOTIN FOX said:

Make a tee out of pvc that fits behind the rifle rack. Cross piece keeps the upright from poking a hole i. The. bottom of the  cart. I use this setup for a ,large umbrella.

B515E9F4-5CD2-4202-9EDE-3D6F28316EA4.jpeg

You might look into flag mounts for recumbent bicycles https://www.premierkites.com/collections/recumbent-bike-flags

Link to comment
Share on other sites

On 5/19/2022 at 7:34 PM, Hoss said:

Do you carry a back-up rifle? Drop the dowel in the barrel. 

No backup on the cart - my wife would not appreciate me leaving her guns in the truck.

Link to comment
Share on other sites

On 5/20/2022 at 2:14 AM, watab kid said:

...or mount a piece of PVC 

Thta's what I'm trying to figure out how to do, and still be able to fold the cart up.

Link to comment
Share on other sites

23 hours ago, SHOOTIN FOX said:

Make a tee out of pvc that fits behind the rifle rack. Cross piece keeps the upright from poking a hole i. The. bottom of the  cart. I use this setup for a ,large umbrella.

B515E9F4-5CD2-4202-9EDE-3D6F28316EA4.jpeg

I like this - how, or do, you secure the top between the upper rifle mounts?

Link to comment
Share on other sites

9 minutes ago, Chief Rick said:

I like this - how, or do, you secure the top between the upper rifle mounts?

 

I used to use one like this for an umbrella holder.

Used a small bungee cord that held to top in place.

Take the PVC rack out when folding cart.

 

Marshal Stone

Link to comment
Share on other sites

thats what i did , used a bungee so everything could be set aside when not needed , i had a cart i got from a friend who has since passed away , he welded/brazed in too the frame but there was no adjustability in that , there are a ;ot of ways it can be done of you set your mind to it , on my golf bag cart i simply bought an umbrella mount that was made for that purpose , it has all kinds of flexibility - check out bag boy accessories 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.