Tennessee williams Posted April 28, 2022 Share Posted April 28, 2022 So I think I have to have something out of adjustment on this thing. Every other wad or three goes in crooked and tears the hull. What say the experts? Link to comment Share on other sites More sharing options...
Captain Bill Burt Posted April 28, 2022 Share Posted April 28, 2022 This expert says he got tired of fooling with his SL900 and just buys factory. Yohan is buying mine and I'll be glad to see it out the door. Link to comment Share on other sites More sharing options...
G W Wade Posted April 28, 2022 Share Posted April 28, 2022 Not Dillon user, but are you sure the wad fingers are intact. Have seen this on my PW. GW Link to comment Share on other sites More sharing options...
Nickel City Dude Posted April 28, 2022 Share Posted April 28, 2022 Hay Captain I have my MEC 9000 Hydraulic up for sale. Are you interested? (1000. + shipping) NCD Link to comment Share on other sites More sharing options...
Assassin Posted April 28, 2022 Share Posted April 28, 2022 I sold my sl900 several years ago. Couldn't ever get it going without the occasional hiccup. Link to comment Share on other sites More sharing options...
Hells Comin Posted April 28, 2022 Share Posted April 28, 2022 Did u try replacing the wad guide. I'm assuming you're shooting 12 gauge so it would be that little red plastic do flicky. Hells Comin Link to comment Share on other sites More sharing options...
Hells Comin Posted April 28, 2022 Share Posted April 28, 2022 Or swing arm torsion spring. Link to comment Share on other sites More sharing options...
Toranado, SASS # 58447 Posted April 28, 2022 Share Posted April 28, 2022 Yes, what HC said, I run 900 with STS's, first change the plastic wad guide fingers and if not there is an adjustment on the alignment of that arm as it centers in the station, there's a little adjustment screw at bottom of wad arm I do believe. Also those STS hulls seem a bit worn too. Link to comment Share on other sites More sharing options...
Boulder Canyon Bob# 32052L Posted April 28, 2022 Share Posted April 28, 2022 Call Dillon Link to comment Share on other sites More sharing options...
Hells Comin Posted April 28, 2022 Share Posted April 28, 2022 Call Widder ! Link to comment Share on other sites More sharing options...
Two Dot, 14911 Posted April 28, 2022 Share Posted April 28, 2022 Minor adjustment on the shell plate advance. Link to comment Share on other sites More sharing options...
Colorado Coffinmaker Posted April 29, 2022 Share Posted April 29, 2022 Naw. Best "adjustment" is to give it to Widder and Let Him make the adjustments. Link to comment Share on other sites More sharing options...
Tennessee williams Posted May 12, 2022 Author Share Posted May 12, 2022 Update: Fellers at Dillon asked me when the last time I oiled the wad thingamajig. Turns out I've never oiled it. Also turns out, that was my problem. Link to comment Share on other sites More sharing options...
DeaconKC Posted May 12, 2022 Share Posted May 12, 2022 16 hours ago, Tennessee williams said: Update: Fellers at Dillon asked me when the last time I oiled the wad thingamajig. Turns out I've never oiled it. Also turns out, that was my problem. Nope, not gonna say anything about you and problems.....nope, just gonna sit here... Link to comment Share on other sites More sharing options...
Max Payne Posted May 12, 2022 Share Posted May 12, 2022 Probably a piece of chicken foot in the wad guide. Or else stuck in the flammerwisken on the back side under the graubenmiffer. Link to comment Share on other sites More sharing options...
Whiskey Hayes #41999 Posted May 12, 2022 Share Posted May 12, 2022 Who would have thought a high speed machine running solid raw materials needed oiling and cleaning. TW is a high speed machine that is lubed with nanner splits and nanner pudding. The cleaning part however is in question. Link to comment Share on other sites More sharing options...
Hells Comin Posted May 13, 2022 Share Posted May 13, 2022 21 hours ago, Tennessee williams said: Update: Fellers at Dillon asked me when the last time I oiled the wad thingamajig. Turns out I've never oiled it. Also turns out, that was my problem. If you would have Listened to me this problem would have already been fixed. I recommend calling Widder - you must have missed my post on April 28th. Hells Comin Link to comment Share on other sites More sharing options...
Tennessee williams Posted May 13, 2022 Author Share Posted May 13, 2022 1 hour ago, Whiskey Hayes #41999 said: Who would have thought a high speed machine running solid raw materials needed oiling and cleaning. TW is a high speed machine that is lubed with nanner splits and nanner pudding. The cleaning part however is in question. Well, I didn't know that thingamajig was supposed to go up and down! And I take a bath every other week whether I need one or not so. Link to comment Share on other sites More sharing options...
Tennessee williams Posted May 13, 2022 Author Share Posted May 13, 2022 4 minutes ago, Hells Comin said: If you would have Listened to me this problem would have already been fixed. I recommend calling Widder - you must have missed my post on April 28th. Hells Comin Hells, I called Widder about it. That joker told me to unplug it and plug it back in. Link to comment Share on other sites More sharing options...
Gateway Kid SASS# 70038 Life Posted May 13, 2022 Share Posted May 13, 2022 2 hours ago, Tennessee williams said: Hells, I called Widder about it. That joker told me to unplug it and plug it back in. That is some really good high tech advice right there. Are you saying it didn't work? After all who do you know more high tech than Widder? Regards Gateway Kid Link to comment Share on other sites More sharing options...
Tennessee williams Posted May 13, 2022 Author Share Posted May 13, 2022 12 minutes ago, Gateway Kid SASS# 70038 Life said: That is some really good high tech advice right there. Are you saying it didn't work? After all who do you know more high tech than Widder? Regards Gateway Kid He charged me 30 bucks too! Link to comment Share on other sites More sharing options...
Widder, SASS #59054 Posted May 13, 2022 Share Posted May 13, 2022 PLEASE..... don't have TN call me. I'm the one who sold him that piece of junk when I couldn't sell it to Red Knee. EDIT: TN is too cheap to buy any proper lube products. He's so cheap that when he opens his billfold, ole George squences his eyeballs calls its been forever since he's seen the light of day. ..........Widder Link to comment Share on other sites More sharing options...
Gateway Kid SASS# 70038 Life Posted May 14, 2022 Share Posted May 14, 2022 20 hours ago, Tennessee williams said: He charged me 30 bucks too! Cheap at twice the price! Lets review Widders legacy of innovation and forward thinking.... He practically invented the concept of the "crunchy peanut butter" action job. And in true humanitarian fashion passed it on to his various competitors! Then showing near divine inspiration he removed the front site from his shotgun, which enhanced the overall aerodynamic's of the barrel, reduced the distraction of something shiny at the end of the gun and in a moment of true genius found that this also perfectly balanced the weight of the gun front to back! (every 4.1 grains of metal counts ) And finally showing a financial acumen, that ranks with the giants of industry, he talked you out of 30 bucks (that I am pretty sure he is using for the 20 bucks I heard he offers to those who write nice things about him) Long live King Widder! Regards (very tongue in cheek!) Gateway Kid Link to comment Share on other sites More sharing options...
Widder, SASS #59054 Posted May 14, 2022 Share Posted May 14, 2022 Gateway Kid, you have great perception. How would you like to be my manager? I won't charge you much...... ..........Widder Link to comment Share on other sites More sharing options...
Tennessee williams Posted May 14, 2022 Author Share Posted May 14, 2022 Widder is the Mouth of the South. Few know it but Widders' favorite pastime is talkin'. His power went out yesterday and his bunkhouse boss taped two playing cards to his lips, so she would stay cool in the breeze. Only thing is, now her hair style is straight back! Link to comment Share on other sites More sharing options...
Widder, SASS #59054 Posted May 14, 2022 Share Posted May 14, 2022 22 minutes ago, Tennessee williams said: Widder is the Mouth of the South. Few know it but Widders' favorite pastime is talkin'. His power went out yesterday and his bunkhouse boss taped two playing cards to his lips, so she would stay cool in the breeze. Only thing is, now her hair style is straight back! Well, atleast both of those cards were KINGS! ..........Widder Link to comment Share on other sites More sharing options...
Krazy Kajun Posted May 14, 2022 Share Posted May 14, 2022 11 minutes ago, Widder, SASS #59054 said: Well, atleast both of those cards were KINGS! ..........Widder Are you shore them paste boards weren't jokers? Kajun Link to comment Share on other sites More sharing options...
Tennessee williams Posted May 14, 2022 Author Share Posted May 14, 2022 44 minutes ago, Krazy Kajun said: Are you shore them paste boards weren't jokers? Kajun Hehehe, remind me to tell you how he gets the turbo boost going. It involves 2 playing cards and a big pot of beans. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.