Buckshot Bear Posted March 31, 2022 Share Posted March 31, 2022 Just converted calibres for the first time ever from 9mm to .38spl on my XL650. The primer tray isn't indexing properly, any leads on why this is happening and how to fix it? See in the pic below the primer isn't centered in the middle so its hitting the edge of the primer pocket in the case and causing all sorts of havoc. Appreciate any help pards, Link to comment Share on other sites More sharing options...
Hendo Posted March 31, 2022 Share Posted March 31, 2022 Is the shell plate going past the detent? Have you tried adjusting the indexing block on the underside? Link to comment Share on other sites More sharing options...
Hendo Posted March 31, 2022 Share Posted March 31, 2022 https://forums.brianenos.com/topic/194251-650-shell-plate-timing-fixed-indexer-block/ Link to comment Share on other sites More sharing options...
Buckshot Bear Posted March 31, 2022 Author Share Posted March 31, 2022 Thanks Hendo.......fixed.....appreciated mate Link to comment Share on other sites More sharing options...
Buckshot Bear Posted March 31, 2022 Author Share Posted March 31, 2022 P.s 15+ years owning the 650 and the first time I've ever loaded a different calibre than 9mm on it and how nice it is to finally have NO powder spillage !!!!!! Link to comment Share on other sites More sharing options...
Hendo Posted March 31, 2022 Share Posted March 31, 2022 Outstanding! Glad ya got her dialed in. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.