Doc Hurd #12379 Posted December 12, 2021 Share Posted December 12, 2021 I found these at a gun show today. Each gun has two cylinders and each cylinder is serial numbered for the gun it belongs to. I’ve never seen this before was this something you could special order? Thanks Doc Link to comment Share on other sites More sharing options...
Warden Callaway Posted December 12, 2021 Share Posted December 12, 2021 Lucky dowg! Now see if your lucky holds out to find caps, powder and balls. Link to comment Share on other sites More sharing options...
The Original Lumpy Gritz Posted December 12, 2021 Share Posted December 12, 2021 Custom fitting, Ruger wouldn't do it. Good find! OLG Link to comment Share on other sites More sharing options...
Desert Pete SASS #42168 Posted December 12, 2021 Share Posted December 12, 2021 Well before the 5 1/2 ROAs folks marked their cylinders because they are not completely interchangeable. Matching serial numbers is a bit much, but it serves the purpose. Link to comment Share on other sites More sharing options...
Tequila Shooter Posted December 12, 2021 Share Posted December 12, 2021 Are you selling them? Link to comment Share on other sites More sharing options...
Old Man Graybeard Posted December 12, 2021 Share Posted December 12, 2021 Are you going to take a walk on the dark side now Doc?? Link to comment Share on other sites More sharing options...
Doc Hurd #12379 Posted December 12, 2021 Author Share Posted December 12, 2021 No I'm not selling them at this time, thanks. Greybeard I might stray to the black side. Link to comment Share on other sites More sharing options...
Singin' Sue 71615 Posted December 12, 2021 Share Posted December 12, 2021 6 hours ago, Old Man Graybeard said: Are you going to take a walk on the dark side now Doc?? I may need to hire you to teach me to load cap n ball...we own several. Does Shanley know how...you bet. Should I try to let him teach me??? Not on your life...I enjoy being married to the man! Link to comment Share on other sites More sharing options...
Tequila Shooter Posted December 12, 2021 Share Posted December 12, 2021 29 minutes ago, Singin' Sue 71615 said: I may need to hire you to teach me to load cap n ball...we own several. Does Shanley know how...you bet. Should I try to let him teach me??? Not on your life...I enjoy being married to the man! It’s easy, powder, wad, ball, press, repeat till you got 5 done, cap the loaded ones and you’re ready to shoot. Link to comment Share on other sites More sharing options...
Singin' Sue 71615 Posted December 12, 2021 Share Posted December 12, 2021 26 minutes ago, Tequila Shooter said: It’s easy, powder, wad, ball, press, repeat till you got 5 done, cap the loaded ones and you’re ready to shoot. "I am NO caveman!" I will still want my big buddy to walk me through a few times! Link to comment Share on other sites More sharing options...
Tucker McNeely Posted December 12, 2021 Share Posted December 12, 2021 Doc, quick go buy a lottery ticket. Don’t hesitate to contact me if you have questions. Tucker. Link to comment Share on other sites More sharing options...
Tucker McNeely Posted December 12, 2021 Share Posted December 12, 2021 1 hour ago, Singin' Sue 71615 said: I may need to hire you to teach me to load cap n ball...we own several. Does Shanley know how...you bet. Should I try to let him teach me??? Not on your life...I enjoy being married to the man! Sue, feel free to contact me also. Tucker Link to comment Share on other sites More sharing options...
Doc Hurd #12379 Posted December 12, 2021 Author Share Posted December 12, 2021 I did buy a lottery ticket just now thanks Tucker Link to comment Share on other sites More sharing options...
Doc Hurd #12379 Posted December 12, 2021 Author Share Posted December 12, 2021 I may want to find a set of lowered hammers if anybody has an extra set Link to comment Share on other sites More sharing options...
Painted Mohawk SASS 77785 Posted December 12, 2021 Share Posted December 12, 2021 Get ay' Doc..Long time no speak !! That's a superset of ROA's..cheers 'Mohawk Link to comment Share on other sites More sharing options...
Warden Callaway Posted December 12, 2021 Share Posted December 12, 2021 35 minutes ago, Doc Hurd #12379 said: I did buy a lottery ticket just now thanks Tucker Before you go to the expense of lower hammers, try switching out the grip panels for some slimmer ones. I found and installed these on my ROA and it made a world of difference. They are Ruger grips, maybe off a NMV. Link to comment Share on other sites More sharing options...
Doc Hurd #12379 Posted December 12, 2021 Author Share Posted December 12, 2021 Thanks Warden I have some of those and will give it a try. I like the look too! Link to comment Share on other sites More sharing options...
Doc Hurd #12379 Posted December 12, 2021 Author Share Posted December 12, 2021 2 hours ago, Painted Mohawk SASS 77785 said: Get ay' Doc..Long time no speak !! That's a superset of ROA's..cheers 'Mohawk Hello Mohawk yes it's been a long time, too long! We had a lot of fun that year and it would be great to shoot with you again. Take care my friend and I hope all is well with you and your family. Doc Link to comment Share on other sites More sharing options...
Doc Hurd #12379 Posted December 12, 2021 Author Share Posted December 12, 2021 3 hours ago, Tequila Shooter said: It’s easy, powder, wad, ball, press, repeat till you got 5 done, cap the loaded ones and you’re ready to shoot. Hi Sue I will be glad to help you with that, but I need to learn myself first! Doc Link to comment Share on other sites More sharing options...
Tequila Shooter Posted December 12, 2021 Share Posted December 12, 2021 @Doc Hurd #12379 I’ve got a pair of these checkered ones on my ROAs and really like them, they fit my hand well. Eagle Grips Link to comment Share on other sites More sharing options...
Parson Remington Posted December 13, 2021 Share Posted December 13, 2021 Doc, Very nice. I am jealous. Been missing you at Powder Creek. Link to comment Share on other sites More sharing options...
Sedalia Dave Posted December 13, 2021 Share Posted December 13, 2021 Eagle Gunfighter grips for an Old Model Vaquero will fit perfectly. The thinner panels make reaching the hammer a lot easier. Link to comment Share on other sites More sharing options...
Frederick Jackson Turner Posted December 13, 2021 Share Posted December 13, 2021 Holy Grail stuff, there, cowboy. Good on ya! Cheers, FJT Link to comment Share on other sites More sharing options...
Doc Hurd #12379 Posted December 14, 2021 Author Share Posted December 14, 2021 20 hours ago, Parson Remington said: Doc, Very nice. I am jealous. Been missing you at Powder Creek. Thanks Parson, I miss you both too! Link to comment Share on other sites More sharing options...
Doc Hurd #12379 Posted December 14, 2021 Author Share Posted December 14, 2021 19 hours ago, Sedalia Dave said: Eagle Gunfighter grips for an Old Model Vaquero will fit perfectly. The thinner panels make reaching the hammer a lot easier. Yes Gunfighter grips would be great! Link to comment Share on other sites More sharing options...
Wallaby Damned Posted December 16, 2021 Share Posted December 16, 2021 Egads! That’s a nice score there. As to loading, it’s dead simple. powder, ball, grease. Done. Cleaning is even easier once you learn about Ballistol and “moose milk” (ballistol:water mixed 1:10). Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.