Cutthroat Cody Posted November 12, 2021 Share Posted November 12, 2021 Has anyone had any issues with your Dillion 650 when you would normally use Federal SPP and then switch to CCI SPP? Link to comment Share on other sites More sharing options...
Jack Spade Posted November 12, 2021 Share Posted November 12, 2021 I haven't had any problems but I am also fanatical about keeping my machine clean. Shouldn't be an issue. Link to comment Share on other sites More sharing options...
Ranger Dan Posted November 12, 2021 Share Posted November 12, 2021 CCI primers are more likely to "hang" in the feed tube. Other than that, no issues. Link to comment Share on other sites More sharing options...
Cliff Hanger #3720LR Posted November 12, 2021 Share Posted November 12, 2021 I loaded several calibers being a commercial reloader for cas shooters. Using primes of different brands would at times cause feeding problems. The cure I found was a simple fix. I took a Winchester primer box and cut it to fix under the primer feed housing. This raise the housing up enough that I no longer had a feeding issue with any primers. This allowed even the taller rifle primers to pass with out interference in the housing. Link to comment Share on other sites More sharing options...
Cutthroat Cody Posted November 13, 2021 Author Share Posted November 13, 2021 thanks....... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.