Sgt. Hochbauer, SASS #64409 Posted October 29, 2021 Share Posted October 29, 2021 I have .90 gr swc for the .32 and 100gr hbwc for the .38 What powders would you recommend and how much. The loading data on these is sparse. The guns are old breaktops Thanks in advance Hochbauer Link to comment Share on other sites More sharing options...
H. K. Uriah, SASS #74619 Posted October 29, 2021 Share Posted October 29, 2021 With old breaktops, use black powder or a sub according to the directions. Link to comment Share on other sites More sharing options...
Stump Water Posted October 29, 2021 Share Posted October 29, 2021 .38 S&W. 1 gr HP38. 80 gr. RN. Link to comment Share on other sites More sharing options...
Polecat Joe Posted October 30, 2021 Share Posted October 30, 2021 for the 32 SW with a 90 gr bullet I use 1.9 grs of Clays Link to comment Share on other sites More sharing options...
The Original Lumpy Gritz Posted October 30, 2021 Share Posted October 30, 2021 32, 1.7gn Unique OLG Link to comment Share on other sites More sharing options...
H. K. Uriah, SASS #74619 Posted October 30, 2021 Share Posted October 30, 2021 For smokeless... .38 S&W: 1.1 Grains Trailboss, 158 grain .360" RN bullet. Going with a lesser load can get your bullets stuck in the bore... Link to comment Share on other sites More sharing options...
Kid Rich Posted October 30, 2021 Share Posted October 30, 2021 Bullseye 32 S&W .7-.9 gs 75g cast lead bullet. Bullseye .83 gs seems to be the most accurate for the BTs Shirttail uses. kR PS that is not a typo-it is less than 1g of bullseye. For 38 S&W I only use real BP case filled to the point I get light compression. Link to comment Share on other sites More sharing options...
Rooster Ron Wayne Posted October 31, 2021 Share Posted October 31, 2021 Fill the case with BP and Seat the bullet on top ! Link to comment Share on other sites More sharing options...
Sgt. Hochbauer, SASS #64409 Posted November 1, 2021 Author Share Posted November 1, 2021 Thanks for all the info.... Hochbauer Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.