Buckshot Bear Posted October 3, 2021 Share Posted October 3, 2021 Do you use a Beam Scale or Electronic Scale? What's a good trustworthy electronic scale? Link to comment Share on other sites More sharing options...
Derringer Dan Posted October 3, 2021 Share Posted October 3, 2021 1: Beam- Redding #2 Master Magnetic Powder Scale 2: Not sure if there is one M2CW Link to comment Share on other sites More sharing options...
The Original Lumpy Gritz Posted October 3, 2021 Share Posted October 3, 2021 Electronic OLG Link to comment Share on other sites More sharing options...
Badlands Bob #61228 Posted October 3, 2021 Share Posted October 3, 2021 I use a Dillon beam scale. Electronic scales are more expensive, and are easier to use, however, they are electronic and will eventually fail. The balance beam scale will last a life time if you don't squash it and gravity still works. RCBS also makes a good balance beam scale. Link to comment Share on other sites More sharing options...
Buckshot Bear Posted October 3, 2021 Author Share Posted October 3, 2021 2 minutes ago, Badlands Bob #61228 said: I use a Dillon beam scale. Electronic scales are more expensive, and are easier to use, however, they are electronic and will eventually fail. The balance beam scale will last a life time if you don't squash it and gravity still works. RCBS also makes a good balance beam scale. I've got an RCBS Model 505 that I've had forever, but was thinking of getting an electronic one. Link to comment Share on other sites More sharing options...
Pat Riot Posted October 3, 2021 Share Posted October 3, 2021 If you go electronic they can be affected by fluorescent lighting from what I have read. I use an RCBS M500 beam scale. I use Lyman scale weights to check my scale. It ain’t the greatest but it works for me. Link to comment Share on other sites More sharing options...
Buckshot Bear Posted October 3, 2021 Author Share Posted October 3, 2021 I load .32 S&W Long with hollow base wadcutters using W231 and 1.4gr and my Lee powder thrower has started becoming erratic for some reason. Was thinking that an electronic scale (a trustworthy one) would be quicker and simpler getting things sorted out. Link to comment Share on other sites More sharing options...
Dutch Nichols, SASS #6461 Posted October 3, 2021 Share Posted October 3, 2021 Lights can't affect them. They have a transducer which sense pressure not light. Chrono's can and have been affected by lighting. Link to comment Share on other sites More sharing options...
Texas Joker Posted October 3, 2021 Share Posted October 3, 2021 I use a lee beam scale with magnetic damper but bought a harbor freight electronic scale last year. Cross check once in a while and they agree so far Link to comment Share on other sites More sharing options...
The Original Lumpy Gritz Posted October 4, 2021 Share Posted October 4, 2021 Take the power cord on electronic scale and wrap it around a strong magnet just before the scale. That magnet removes RFI as these scales are DC powdered and very sensitive to RFI. OLG Link to comment Share on other sites More sharing options...
Sedalia Dave Posted October 4, 2021 Share Posted October 4, 2021 Go to Amazon and search for a jewelers scale. You can get a good one with 0.001 gram accuracy (0.015 grains) for about 30 dollars. the best accuracy you’ll ever get from a dedicated electronic powder scale is 0.1 grains and you’ll pay over $100 for it to boot. All scales will give inaccurate measurements if there are any drafts in the vicinity. AC/heat ducts are the most common sources. Keep in mind even though you can’t feel the draft a scale can be influenced by it. Buy a set of check weights while your on Amazon. Link to comment Share on other sites More sharing options...
Pat Riot Posted October 4, 2021 Share Posted October 4, 2021 2 hours ago, Dutch Nichols, SASS #6461 said: Lights can't affect them. They have a transducer which sense pressure not light. Chrono's can and have been affected by lighting. 33 minutes ago, The Original Lumpy Gritz said: Take the power cord on electronic scale and wrap it around a strong magnet just before the scale. That magnet removes RFI as these scales are DC powdered and very sensitive to RFI. OLG What OLG posted is what I recall about fluorescent lighting affecting electronic scale. The RFI / EMI from the 1200 Hz from the lights affects the scale. Thanks OLG. Link to comment Share on other sites More sharing options...
DeaconKC Posted October 4, 2021 Share Posted October 4, 2021 I still have both on my bench. Link to comment Share on other sites More sharing options...
Buckshot Bear Posted October 4, 2021 Author Share Posted October 4, 2021 21 minutes ago, Sedalia Dave said: Go to Amazon and search for a jewelers scale. You can get a good one with 0.001 gram accuracy (0.015 grains) for about 30 dollars. the best accuracy you’ll ever get from a dedicated electronic powder scale is 0.1 grains and you’ll pay over $100 for it to boot. All scales will give inaccurate measurements if there are any drafts in the vicinity. AC/heat ducts are the most common sources. Keep in mind even though you can’t feel the draft a scale can be influenced by it. Buy a set of check weights while your on Amazon. Gotta' be honest SD....I don't know how'd I'd go converting .points of grams to grains all the time Link to comment Share on other sites More sharing options...
Buckshot Bear Posted October 4, 2021 Author Share Posted October 4, 2021 These look identical (except for the price) and the cheaper one states gn? https://www.ebay.com.au/itm/114931995413?hash=item1ac27b1315:g:pDIAAOSwDURhFH-A https://www.ebay.com.au/itm/264085825172?epid=4011035520&hash=item3d7cbde694:g:cUcAAOSwvZNgHHrv Link to comment Share on other sites More sharing options...
Badger Mountain Charlie SASS #43172 Posted October 4, 2021 Share Posted October 4, 2021 I have been using an RCBS 505 that I purchased back when racoons were teenagers. (Circa 1980). Loaded all of my reloads of 40 years and ain't lost or blown up anything, yet. Link to comment Share on other sites More sharing options...
Hardpan Curmudgeon SASS #8967 Posted October 4, 2021 Share Posted October 4, 2021 Prices on electronic scales seem to run the gamut from cheap to outrageous. I'm sure the expensive ones work well, and I suspect that some of the inexpensive ones will also. That said, in 1971 I paid $20 for a simple but remarkably accurate, magnetically dampened Pacific scale. Still works just fine. If I win the lottery I'll pop for a nice electronic model. 'Til then, I'm happy. Link to comment Share on other sites More sharing options...
Wallaby Jack, SASS #44062 Posted October 4, 2021 Share Posted October 4, 2021 17 minutes ago, Badger Mountain Charlie SASS #43172 said: I have been using an RCBS 505 that I purchased back when racoons were teenagers. (Circa 1980). Loaded all of my reloads of 40 years and ain't lost or blown up anything, yet. ............ maybe you ain't tryin' hard enough ........... Link to comment Share on other sites More sharing options...
Pat Riot Posted October 4, 2021 Share Posted October 4, 2021 56 minutes ago, Buckshot Bear said: Gotta' be honest SD....I don't know how'd I'd go converting .points of grams to grains all the Each gram is 15.4 grains. Look up a conversion website. Search “grams to grains conversion” I posted a site but it was screwy so I removed it. Link to comment Share on other sites More sharing options...
watab kid Posted October 4, 2021 Share Posted October 4, 2021 electronic , but i have a backup beam if i need it Link to comment Share on other sites More sharing options...
Buckshot Bear Posted October 4, 2021 Author Share Posted October 4, 2021 9 minutes ago, Pat Riot, SASS #13748 said: This website will help. https://whatisconvert.com/20-grams-in-ounces Each gram is 15.4 grains. Thanks Pat, I'd struggle mate working up a load 1.3gn 1.4gn 1.5gn up to 1.8gn of W231 for my. 32 target loads for my Pardini auto. The RCBS 5.0.5 beam scale makes it visibly very easy, but slow. I was thinking that a good electronic powder scale would speed checking up. Link to comment Share on other sites More sharing options...
Buckshot Bear Posted October 4, 2021 Author Share Posted October 4, 2021 Also to throw in.....these (for me at least) newer round Lee powder hoppers that you can turn off are bloody brilliant to my old square ones!!!!!! Link to comment Share on other sites More sharing options...
Pat Riot Posted October 4, 2021 Share Posted October 4, 2021 Just now, Buckshot Bear said: Lee powder hoppers that you can turn off What do ya do, ask them what their sign is or say something like “Do you believe in love at first sight, or do I have to walk by you again?” Link to comment Share on other sites More sharing options...
Wallaby Jack, SASS #44062 Posted October 4, 2021 Share Posted October 4, 2021 I once had one of them "turner-offers" ....... .......... mine was the special "SELFturner-offer" model, which is what it did halfway through a run of competition rounds I was loading up for an "away" match ..... Fixed it by wrapping insulation tape around it to bind it up in the "on" position ........ was all set in campsite at 9pm REloading my reloaded ammo into the night with a torch attached to the beak of my ballcap so's I could see what I was doin' ..... Turn it on and wrap tape around it ..... was ok 'til I fixed it propper, ... I bought a Dillon Link to comment Share on other sites More sharing options...
Buckshot Bear Posted October 4, 2021 Author Share Posted October 4, 2021 7 minutes ago, Wallaby Jack, SASS #44062 said: I once had one of them "turner-offers" ....... .......... mine was the special "SELFturner-offer" model, which is what it did halfway through a run of competition rounds I was loading up for an "away" match ..... Fixed it by wrapping insulation tape around it to bind it up in the "on" position ........ was all set in campsite at 9pm REloading my reloaded ammo into the night with a torch attached to the beak of my ballcap so's I could see what I was doin' ..... Turn it on and wrap tape around it ..... was ok 'til I fixed it propper, ... I bought a Dillon That sounded like a fun night Wallaby! I reload 9mm on my Dillon 650, but still use the Lyman turret that I've squeezed two powder droppers on for .32 Olympic centrefire match and .38 Olympic centrefire match Now with CAS and reloading for six (6) I'm thinking that I'm gonna' have to get a caliber change for the XL650. Link to comment Share on other sites More sharing options...
Sedalia Dave Posted October 4, 2021 Share Posted October 4, 2021 1 hour ago, Buckshot Bear said: Gotta' be honest SD....I don't know how'd I'd go converting .points of grams to grains all the time those scales will display the weight in grams, grains, ounces and carots. Just pick your poison. No need to do the conversion manually. I have two sets and love them both. I also have a RCBS 5-0-5 and a 10-10 balance beam scales that get almost zero use. Link to comment Share on other sites More sharing options...
JD Lud Posted October 4, 2021 Share Posted October 4, 2021 If your loading pistol only and just checking an electric is fine and readily available..as set get one that does units you want. To further complicate things, if doing rifle rounds l personally really like my Hornady auto charge. That thing is great and they have a pro model now and RCBS makes a great one too I hear. For rifle by the time I seat a round the next charge is ready…and dead on. Link to comment Share on other sites More sharing options...
Pat Riot Posted October 4, 2021 Share Posted October 4, 2021 6 hours ago, Sedalia Dave said: those scales will display the weight in grams, grains, ounces and carots. Just pick your poison. No need to do the conversion manually. I have two sets and love them both. I also have a RCBS 5-0-5 and a 10-10 balance beam scales that get almost zero use. Which one did you buy. There are quite a few different ones on Amazon. I found one that gets really good reviews for $20 that will do 0.001 grams to 50 grams (approx. 770 grains) I just have a bit of a hard time believing something that cheap works so well. JamBer Digital Milligram Pocket Scales 0.001g x 50g, Electronic Weighing Scales for Jewelry Coins Reload and Kitchen, 6 Mode Mini Gram Scale with Calibration Weights Tweezers and Weighing Pans https://smile.amazon.com/dp/B0731F3F2N/ref=cm_sw_r_cp_api_glt_fabc_QNPFFA2FEEPNQ1P375FZ Link to comment Share on other sites More sharing options...
Rye Miles #13621 Posted October 4, 2021 Share Posted October 4, 2021 I have a small Franklin Arsenal digital scale that I've been using for probably 7-8 years. It's the size of a cell phone. Link to comment Share on other sites More sharing options...
Slapshot Posted October 4, 2021 Share Posted October 4, 2021 I'm running a Redding beam scale. Would love to have a electronic one but most are expensive and if not I wonder if they are any good. So I have never got around to getting a electronic one. Anyone got some links to some good inexpensive electronic scales/ or recommendations? Link to comment Share on other sites More sharing options...
Sedalia Dave Posted October 4, 2021 Share Posted October 4, 2021 3 hours ago, Pat Riot, SASS #13748 said: Which one did you buy. There are quite a few different ones on Amazon. I found one that gets really good reviews for $20 that will do 0.001 grams to 50 grams (approx. 770 grains) I just have a bit of a hard time believing something that cheap works so well. JamBer Digital Milligram Pocket Scales 0.001g x 50g, Electronic Weighing Scales for Jewelry Coins Reload and Kitchen, 6 Mode Mini Gram Scale with Calibration Weights Tweezers and Weighing Pans https://smile.amazon.com/dp/B0731F3F2N/ref=cm_sw_r_cp_api_glt_fabc_QNPFFA2FEEPNQ1P375FZ Looks like a good one to me I bought this one off Amazon. https://www.amazon.com/gp/aw/d/B011J88S8M?psc=1&ref=ppx_pop_mob_b_asin_title My other one has a built in bullseye level. Don’t remember where I bought it from. The key to accurate measurements is making sure the scales are level. Link to comment Share on other sites More sharing options...
John Kloehr Posted October 4, 2021 Share Posted October 4, 2021 22 minutes ago, Slapshot said: Anyone got some links to some good inexpensive electronic scales/ or recommendations? I bought the Hornady G3 scale. I know I paid a few bucks for the name/logo, but it works. https://www.amazon.com/Hornady-G3-1500-Electronic-Scale-050104/dp/B08SPG6GHF/ref=sr_1_2?dchild=1&keywords=hornady+scale&qid=1633353011&sr=8-2 I paid about $40 for my G3, more money at Amazon. Shop around, the Hornady M2 costs even more, don't know enough yet to decide if it is worth it. Link to comment Share on other sites More sharing options...
Pulp, SASS#28319 Posted October 4, 2021 Share Posted October 4, 2021 I bought one from Cabelas that I use occasionally. It has an auto zero feature that makes it difficult to trickle up to a desired weight. I finally learned to tap the pan each time I added small amounts of powder. Link to comment Share on other sites More sharing options...
Badger Mountain Charlie SASS #43172 Posted October 4, 2021 Share Posted October 4, 2021 14 hours ago, Wallaby Jack, SASS #44062 said: I once had one of them "turner-offers" ....... .......... mine was the special "SELFturner-offer" model, which is what it did halfway through a run of competition rounds I was loading up for an "away" match ..... Fixed it by wrapping insulation tape around it to bind it up in the "on" position ........ was all set in campsite at 9pm REloading my reloaded ammo into the night with a torch attached to the beak of my ballcap so's I could see what I was doin' ..... Turn it on and wrap tape around it ..... was ok 'til I fixed it propper, ... I bought a Dillon What is wrong with by guess and by golly?. Have you no spirit of adventure? You OZ guys are a shy bunch! Link to comment Share on other sites More sharing options...
Happy Jack, SASS #20451 Posted October 4, 2021 Share Posted October 4, 2021 I gave up on beam scales many years ago. However being a chemist I was used to Accurate scales. So I have 3 electronic scales. A great 35 year old Mettler, A newer Sartorius,(20 years old) and a 2 year old A&D out of Canada. All 3 weight perfectly, A&D is least expensive, about $800 but works fine. All weight to .05grains easily. Buy once, cry once, and have perfect numbers the rest of your life. If you don't need precision there are plenty of $100 electronic scales that will work for you. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.