sassnetguy50 Posted September 23, 2021 Share Posted September 23, 2021 Is the Birchwood Casey blue in a bottle a good way to coat a revolver for rust prevention? Is there an alternative product you recommend? Background: through a series of unfortunate events I am trying to finish a 38 that an idiot took down to the white. All of the blue is gone. Most of the rust is gone save for the pits in the gripframe. The goal is to bring the piece to "truck gun" quality. Something more durable than Rustoleum with no regard to cosmetics. Link to comment Share on other sites More sharing options...
Larsen E. Pettifogger, SASS #32933 Posted September 23, 2021 Share Posted September 23, 2021 I have had the best luck with Brownell's Oxpho-blue or Formula 44-40. Neither is going to prevent rust and no cold blue is going to look good for a complete gun reblue. For a truck gun you are better off with something like ceracoat. Link to comment Share on other sites More sharing options...
Chickasaw Bill SASS #70001 Posted September 23, 2021 Share Posted September 23, 2021 epoxy paint in John Deere green , that ortta make it stand out CB Link to comment Share on other sites More sharing options...
Hendo Posted September 23, 2021 Share Posted September 23, 2021 Paint it bright orange, that way when you get pulled over you can say it's a flare gun. Link to comment Share on other sites More sharing options...
J-BAR #18287 Posted September 23, 2021 Share Posted September 23, 2021 Try it, you may like it. If you aren’t satisfied with the look, you can easily go back to white by using vinegar or Birchwood Casey Blue and Rust Remover. Wiping a thin coat if CLP on the gun after quick bluing helps prevent rust unless you are really abusive. Link to comment Share on other sites More sharing options...
Linn Keller, SASS 27332, BOLD 103 Posted September 23, 2021 Share Posted September 23, 2021 32 minutes ago, Chickasaw Bill SASS #70001 said: epoxy paint in John Deere green , that ortta make it stand out CB I am given to understand that, in Lousiana, it's a yearly tradition to paint your waterfowl guns. The paint is never stripped: as it wears, another coat is applied; the appearance of wear showing many layers, I'm told, evokes memories of past years and past hunts. Chickasaw Bill's idea of a coat of paint might not be amiss at all! (Besides, I'm fond of John Deere green!) Link to comment Share on other sites More sharing options...
Texas Joker Posted September 23, 2021 Share Posted September 23, 2021 Light coat of rust. 0000 Steel wool till smooth leaving smooth rust on surface. Repeat 4-5 times. Oil well Rust (browning) is a proper surface treatment. If you want blued boil in water before you oil it. Link to comment Share on other sites More sharing options...
Hardpan Curmudgeon SASS #8967 Posted September 24, 2021 Share Posted September 24, 2021 I've used Birchwood Casey. Multiple applications; quite satisfied with the results. Not a museum piece by any means, but certainly acceptable. Link to comment Share on other sites More sharing options...
DeaconKC Posted September 24, 2021 Share Posted September 24, 2021 Okay, for a truck gun, either Oxpho-blue or B-C will work with a couple of notes as they said above: One make sure it is clean and oil free. Heat it up and expect to use at least three coats before it looks decent. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.