Squ1d Vicious Posted September 21, 2021 Share Posted September 21, 2021 Looking for some 45 cowboy special brass if anyone is willing to part with some. I appreciate it. Link to comment Share on other sites More sharing options...
Grand Stan Posted September 22, 2021 Share Posted September 22, 2021 45LC correct? Or????? Link to comment Share on other sites More sharing options...
Squ1d Vicious Posted September 22, 2021 Author Share Posted September 22, 2021 Its the shortened 45LC. Same OAL as 45 ACP Link to comment Share on other sites More sharing options...
Sgt Duncan Posted September 22, 2021 Share Posted September 22, 2021 Starline is avoiding the whole .45 Colt vs .45 “Long” Colt. For those that use the designation.45 LC the Cowboy Special could be described as “.45 Short Colt” LOL Link to comment Share on other sites More sharing options...
Squ1d Vicious Posted September 23, 2021 Author Share Posted September 23, 2021 Still searching..... Link to comment Share on other sites More sharing options...
Twelve Bore Posted September 24, 2021 Share Posted September 24, 2021 Starline brass has it in stock Link to comment Share on other sites More sharing options...
Loophole LaRue, SASS #51438 Posted September 24, 2021 Share Posted September 24, 2021 9 minutes ago, Twelve Bore said: Starline brass has it in stock Ten minutes later - out of stock, no backorders. LL Link to comment Share on other sites More sharing options...
Will Burn Powder Posted September 24, 2021 Share Posted September 24, 2021 18 minutes ago, Twelve Bore said: Starline brass has it in stock I have had mine on order for months I see it is now listed on back order (Was no back order) on Starline site with a ship date to be determined hopefully they started making it and we should see some ship soon. Link to comment Share on other sites More sharing options...
Amigo Posted September 24, 2021 Share Posted September 24, 2021 I'm viewing it as Backorder, right now, and they are taking orders. I have ordered some stuff listed this way and received it the next week from Starline, although the 7mm-08 I ordered 5 or 6 weeks ago is still listed as "processing," so the "backorder" status can vary greatly. Link to comment Share on other sites More sharing options...
Yul Lose Posted September 25, 2021 Share Posted September 25, 2021 It’s not that hard to make it yourself from .45 Colt brass or .45 Scofield. Harbor freight sells a little cut off saw that works very well and RCBS brass prep station is all you need. .45 Colt brass shows up for sale on the classifieds all of the time so it may be an option for you. Link to comment Share on other sites More sharing options...
Rooster Ron Wayne Posted September 26, 2021 Share Posted September 26, 2021 11 hours ago, Yul Lose said: It’s not that hard to make it yourself from .45 Colt brass or .45 Scofield. Harbor freight sells a little cut off saw that works very well and RCBS brass prep station is all you need. .45 Colt brass shows up for sale on the classifieds all of the time so it may be an option for you. It's easy to do . I make my 44 special and 44 Russian out of split 44 Magnum case's on a Lyman case trimmer. Link to comment Share on other sites More sharing options...
WOODFOX , sass#34179 Posted September 26, 2021 Share Posted September 26, 2021 I cut down my split 45 Colt cases that aren't split too far Woodfox Link to comment Share on other sites More sharing options...
Squ1d Vicious Posted September 27, 2021 Author Share Posted September 27, 2021 Thanks for the info, I may try that. Link to comment Share on other sites More sharing options...
Squ1d Vicious Posted October 7, 2021 Author Share Posted October 7, 2021 still looking... Link to comment Share on other sites More sharing options...
Fort Reno Kid Posted October 8, 2021 Share Posted October 8, 2021 Concur with Woodfox and others. I held on to 45 Colt brass … alright, I usually refer to it as Long Colt … with minor splits until I had a decent size batch of it. Then, on to visit a shooting buddy with a lathe. Faster than you can say “Judge Roy Bean” we had it trimmed to 45 Special length. The trimmed brass prob doesn’t last as long as new stuff from Starline but has given me good service. I use the short brass for light loads for use in two percussion revolvers with Howell conversion cylinders. Howell advises using loads not to exceed Cowboy” strength. I take it a notch lower with light loads that still have plenty of punch to take down the poppers. The short brass surely seems to give better ignition with light loads than the full-length brass. Adios Fort Reno Kid Side note. If you shoot 44 mag/44 Special, those cases with small splits can be trimmed to 44 Russian or even 44 mag to 44 Special. In these days of ammo and component shortages, these are steps worth considering. Link to comment Share on other sites More sharing options...
Squ1d Vicious Posted October 11, 2021 Author Share Posted October 11, 2021 copy that... thanks Link to comment Share on other sites More sharing options...
JJ “Reb” Wainwright 110206 Posted October 12, 2021 Share Posted October 12, 2021 Starline is currently allowing back orders of 45CS brass, which in my experience means they are planning a run soon and it likely won’t be too long of a wait. Just thought I’d pass along. JJ Link to comment Share on other sites More sharing options...
Squ1d Vicious Posted October 12, 2021 Author Share Posted October 12, 2021 I had a backorder in for about 6 months... cancelled when a guy on here sold me some..turned out half what he sold me was 44 Russian. Honest mistake since they look almost identical until you put in the reloader. He was a stand up guy and made it right... Hence me still being short of Cowboy "Short." Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.