StoneyMike Posted August 15, 2021 Share Posted August 15, 2021 I'm looking to bust into the Frontiersman class and was wondering if anyone had heard of lowered hammers for the Pietta '61 Navy's? Is this a pure custom job or are there some available out there somewhere? I just don't have long enough thumbs to make the stock ones work fast. If I have to I can order two factory hammers to work on as I have the ability to cut and weld up a set. Are there suitable donors to get the pad nice ad big and comfy? Would this even be legal/ I suppose I should have started with that one! Any help or leads would be greatly appreciated. Thanks StoneyMike Link to comment Share on other sites More sharing options...
Larsen E. Pettifogger, SASS #32933 Posted August 15, 2021 Share Posted August 15, 2021 No aftermarket lowered hammers. Heat and bend the stock ones. Link to comment Share on other sites More sharing options...
Colorado Coffinmaker Posted August 15, 2021 Share Posted August 15, 2021 WHY YES!! Yes I have heard of lowered hammer spurs for Pietta!! Ye Haw !! But, you can't just go out and buy 'em. Have to be "made" by cut and weld. Pietta and Uberti both make wide pad hammers with spurs that will work once cut off to be welded on in place of the narrow OEM spurs. Check in with Taylors and Co. as well as Cimarron for Hammers. Yes Sir. They are quite legal. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.