Sgt. Hochbauer, SASS #64409 Posted July 28, 2021 Share Posted July 28, 2021 Took apart my ROA and changed the hammer spring...but now after being put back together the trigger does not release the hammer. Did not have any issues when I did the other one. What am I not seeing?? HELP!! Hochbauer Link to comment Share on other sites More sharing options...
Nickel City Dude Posted July 28, 2021 Share Posted July 28, 2021 Check your sear spring, It may be in backwards. Link to comment Share on other sites More sharing options...
Joe West Posted July 28, 2021 Share Posted July 28, 2021 Look at the hammer spring strut. May need need to put it back in with the correct angle. Trigger spring is a coil in the trigger housing on ROA. Joe Link to comment Share on other sites More sharing options...
Warden Callaway Posted July 28, 2021 Share Posted July 28, 2021 Link to comment Share on other sites More sharing options...
Sgt. Hochbauer, SASS #64409 Posted July 29, 2021 Author Share Posted July 29, 2021 Thanks for the suggestions. I have watched the videos and know it must be something stupid that I am overlooking. I did the one with no issues. Fortunately I have some backups. To be continued! Link to comment Share on other sites More sharing options...
45 Dragoon Posted July 29, 2021 Share Posted July 29, 2021 Joe West is probably right. You more than likely have the strut upside down. Mike Link to comment Share on other sites More sharing options...
Warden Callaway Posted July 29, 2021 Share Posted July 29, 2021 2 hours ago, 45 Dragoon said: Joe West is probably right. You more than likely have the strut upside down. Mike Can the strut assembly be removed and replaced without taking the grip frame off? Link to comment Share on other sites More sharing options...
45 Dragoon Posted July 29, 2021 Share Posted July 29, 2021 59 minutes ago, Warden Callaway said: Can the strut assembly be removed and replaced without taking the grip frame off? Most of the time yes but sometimes it's pretty tight. You may need to loosen the grip frame screws to gain some clearance. Mike Link to comment Share on other sites More sharing options...
Warden Callaway Posted July 29, 2021 Share Posted July 29, 2021 2 minutes ago, 45 Dragoon said: Most of the time yes but sometimes it's pretty tight. You may need to loosen the grip frame screws to gain some clearance. Mike Thanks, Link to comment Share on other sites More sharing options...
45 Dragoon Posted July 29, 2021 Share Posted July 29, 2021 2 minutes ago, Warden Callaway said: Thanks, No problem. Mike Link to comment Share on other sites More sharing options...
T-Square Posted August 1, 2021 Share Posted August 1, 2021 This is why we count on you 45 Dragoon ! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.