sassnetguy50 Posted July 20, 2021 Share Posted July 20, 2021 Is anyone here in the medical equipment supply industry that works with Philips breathers? Are you getting any communication? Having a hard time getting solid answers on the recall. Link to comment Share on other sites More sharing options...
Pat Riot Posted July 20, 2021 Share Posted July 20, 2021 FDA Website with info on the recall.https://www.fda.gov/medical-devices/safety-communications/certain-philips-respironics-ventilators-bipap-and-cpap-machines-recalled-due-potential-health-risks The link below has details. This link is on the FDA site. https://www.philips.com/c-dam/b2bhc/master/landing-pages/src/update/documents/philips-recall-letter-2021-05-a-2021-06-a.pdf Does this help? Link to comment Share on other sites More sharing options...
Pat Riot Posted July 20, 2021 Share Posted July 20, 2021 I had to go check mine. It’s a Philips Respironics System One. Edit:Sonofa….make sure you look at the list on page 3 as well…mine is on the list… Link to comment Share on other sites More sharing options...
Chili Pepper Kid, SASS #60463 Posted July 20, 2021 Share Posted July 20, 2021 I know all about it. I work at a Sleep Lab. Philips started getting complaints rare(1 thousand out of millions) of machines where particles of foam were entering the pathway of air which Philips thought would impossible because the foam was incased in plastic around the blower. Much to their surprise when they opened these machines everything was horribly corroded. The plastic case around the foam had turned brittle and fell apart and the foam also fell apart and could now enter the pathway of air. They discovered that the common denominator on all these damaged machines was the owners had been using a non-FDA approved CPAP cleaner that uses Ozone called the SoClean. Philips met with the FDA to report their findings asking if they could do anything to stop SoClean. FDA can't do much about the SoClean since it's not the medical equipment but since Philips had just reported a safety issue with their machine they could do something about that. FDA instructed them to recall ALL of their machines. Link to comment Share on other sites More sharing options...
bgavin Posted July 20, 2021 Share Posted July 20, 2021 I'm surprised they have not yet come up with a Hookah-like water filtration device for CPAPs. This would effectively filter out particles, pollen, dust, etc. I bought a lab double neck flask to experiment with this, but am having trouble locating the necessary stoppers and fitting. I also use a CPVC street ell to have a more straight line hose run, instead of bending the hose 90 degrees. Works great. Link to comment Share on other sites More sharing options...
sassnetguy50 Posted July 20, 2021 Author Share Posted July 20, 2021 Thanks @Chili Pepper Kid, SASS #60463 Good to know we won't wake up choking from the machine or not at all from lack of machine. Link to comment Share on other sites More sharing options...
Hardpan Curmudgeon SASS #8967 Posted July 20, 2021 Share Posted July 20, 2021 6 hours ago, Chili Pepper Kid, SASS #60463 said: Philips met with the FDA to report their findings asking if they could do anything to stop SoClean. FDA can't do much about the SoClean since it's not the medical equipment but since Philips had just reported a safety issue with their machine they could do something about that. FDA instructed them to recall ALL of their machines. So... because of a problem caused by a third-party product, Phillips has to recall all their machines?? That bites for Phillips. Link to comment Share on other sites More sharing options...
Pat Riot Posted July 20, 2021 Share Posted July 20, 2021 @sassnetguy50 Thank you very much for posting this thread, otherwise I may not have known about this issue. @Chili Pepper Kid, SASS #60463 Thank you for providing some details on the reason for this. Curious, I went looking for this “So Clean” CPAP cleaning system. It appears you can still buy them online. But the word “ozone” isn’t mentioned so perhaps I am mistaken that these are the correct “SoClean” products. I have never used any other cleaning processes other than the ones I learned from my doctors and the folks that inspected my machine at the medical equipment supplier’s office. Why? Because I do not trust after market products that aren’t recommended by my pulmonologist or equipment reps. Perhaps my suspicions have paid off in this case. 2 hours ago, Hardpan Curmudgeon SASS #8967 said: So... because of a problem caused by a third-party product, Phillips has to recall all their machines?? That bites for Phillips. Yeah, how chicken sh** is that? Link to comment Share on other sites More sharing options...
Chili Pepper Kid, SASS #60463 Posted July 20, 2021 Share Posted July 20, 2021 1 hour ago, Pat Riot, SASS #13748 said: @sassnetguy50 Thank you very much for posting this thread, otherwise I may not have known about this issue. @Chili Pepper Kid, SASS #60463 Thank you for providing some details on the reason for this. Curious, I went looking for this “So Clean” CPAP cleaning system. It appears you can still buy them online. But the word “ozone” isn’t mentioned so perhaps I am mistaken that these are the correct “SoClean” products. I have never used any other cleaning processes other than the ones I learned from my doctors and the folks that inspected my machine at the medical equipment supplier’s office. Why? Because I do not trust after market products that aren’t recommended by my pulmonologist or equipment reps. Perhaps my suspicions have paid off in this case. Yeah, how chicken sh** is that? Their commercials and ads never do mention Ozone, they usually mention "Activated Oxygen" which is the same thing. O3, trioxygen, activated oxygen & Ozone all same thing. For years their infomercials were all over TV with William Shatner as the spokes person. We told all of our patients of the risks but that infomercial was too strong. Pat your System One has to be an old machine which also can contribute to the foam falling apart. That's one of the reasons it's recommended machines be replaced every 5 yrs. Here is what the FDA released on the SoClean after Philips brought it to their attention. Potential Risks Associated With The Use of Ozone and Ultraviolet (UV) Light Products for Cleaning CPAP Machines and Accessories: FDA Safety Communication | FDA Link to comment Share on other sites More sharing options...
Pat Riot Posted July 20, 2021 Share Posted July 20, 2021 1 hour ago, Chili Pepper Kid, SASS #60463 said: Their commercials and ads never do mention Ozone, they usually mention "Activated Oxygen" which is the same thing. O3, trioxygen, activated oxygen & Ozone all same thing. For years their infomercials were all over TV with William Shatner as the spokes person. We told all of our patients of the risks but that infomercial was too strong. Pat your System One has to be an old machine which also can contribute to the foam falling apart. That's one of the reasons it's recommended machines be replaced every 5 yrs. Here is what the FDA released on the SoClean after Philips brought it to their attention. Potential Risks Associated With The Use of Ozone and Ultraviolet (UV) Light Products for Cleaning CPAP Machines and Accessories: FDA Safety Communication | FDA Interesting. My doctor tells me that insurance companies won't authorize replacement until 7 years. I have had mine 7 years. Calling to set up a replacement appt today. Thank you. Link to comment Share on other sites More sharing options...
sassnetguy50 Posted July 20, 2021 Author Share Posted July 20, 2021 33 minutes ago, Pat Riot, SASS #13748 said: Interesting. My doctor tells me that insurance companies won't authorize replacement until 7 years. I have had mine 7 years. Calling to set up a replacement appt today. Thank you. Every 5 years here. May check with your insurance provider on what your policy covers. Link to comment Share on other sites More sharing options...
Chili Pepper Kid, SASS #60463 Posted July 20, 2021 Share Posted July 20, 2021 Every insurance I've ever came across it's been 5 yrs. If you register for the recall you will eventually get a new machine. Link to comment Share on other sites More sharing options...
Pat Riot Posted July 20, 2021 Share Posted July 20, 2021 9 minutes ago, Chili Pepper Kid, SASS #60463 said: Every insurance I've ever came across it's been 5 yrs. If you register for the recall you will eventually get a new machine. I did register. I am just wondering if I would give my current machine up. Could be evidence later on... Link to comment Share on other sites More sharing options...
bgavin Posted July 20, 2021 Share Posted July 20, 2021 Wow... every five years... That would get steep every 5 years. I have a Cash Guarantee Card that I used to buy mine... about $900 if I remember correctly. Kaiser wanted me to buy some crappy little thing, so I got an Rx and bought from cpap.com Not disappointed at all. I keep the filter clean, and replace the mask and hose every now and then... it runs like a Timex. Link to comment Share on other sites More sharing options...
sassnetguy50 Posted August 23, 2021 Author Share Posted August 23, 2021 Update: Philips sent an email saying replacements will ship in 12 months. Link to comment Share on other sites More sharing options...
Cheyenne Ranger, 48747L Posted August 23, 2021 Share Posted August 23, 2021 3 hours ago, sassnetguy50 said: Update: Philips sent an email saying replacements will ship in 12 months. how long can you hold your breath? Link to comment Share on other sites More sharing options...
Sedalia Dave Posted August 23, 2021 Share Posted August 23, 2021 By now, anyone with one of the CPAP machines in question should have been provided an inline HEPA filter. Link to comment Share on other sites More sharing options...
Pat Riot Posted August 24, 2021 Share Posted August 24, 2021 I have not heard a thing from Philips or anyone else. To be fair I have seen no evidence of the foam insulation breakdown that is the reason for the recall. I have never used the cleaning system that set all this off in the first place. Link to comment Share on other sites More sharing options...
Sedalia Dave Posted August 24, 2021 Share Posted August 24, 2021 My stepson is a Respiratory Therapist and in the durable medical goods business. All his customers have been given a HEPA filter to go inline between the machine and face apparatus to ensure that no foam or plastic particles are inhaled. As Pat eluded to, almost all the people having trouble have been using devices like So Clean. Link to comment Share on other sites More sharing options...
stoverix Posted October 25, 2021 Share Posted October 25, 2021 My sister works in a private clinic and, as she says, they buy new medical equipment like Philips breathers every 3 years. In addition, the clinic constantly purchases medical gloves at an appropriate price, as they are a necessary consumable. In total, according to my sister, three things affect the quality of the patient's treatment. These are the qualifications and experience of a doctor, high-quality medical equipment and, of course, the use of high-quality consumables such as medical gloves and cotton wool. Link to comment Share on other sites More sharing options...
Pat Riot Posted October 25, 2021 Share Posted October 25, 2021 On 8/24/2021 at 6:24 AM, Sedalia Dave said: My stepson is a Respiratory Therapist and in the durable medical goods business. All his customers have been given a HEPA filter to go inline between the machine and face apparatus to ensure that no foam or plastic particles are inhaled. As Pat eluded to, almost all the people having trouble have been using devices like So Clean. I somehow missed this when you posted it. Interesting. I actually wondered if something like this would be or could be a fix. I also find it interesting that I heard about here and not from Philips, the online respirator company I have been corresponding with or my pulmonologist. To be fair my pulmonologist hasn’t been working with me on my BiPap. I see Amazon has a bunch of suppliers providing inline filters for this particular problem but none say “HEPA” on their ads. Link to comment Share on other sites More sharing options...
sassnetguy50 Posted November 19, 2021 Author Share Posted November 19, 2021 Update email: "While we have already made progress in shipping replacement devices, and have increased our production capacity, we anticipate the repair and replacement program in the US will take through approximately September 2022 to complete. " Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.