Hardpan Curmudgeon SASS #8967 Posted July 12, 2021 Share Posted July 12, 2021 So ~ favorite bench rests? From sandbags to folded jacket to home-made mechanical rests, or sophisticated "store bought" gear? Link to comment Share on other sites More sharing options...
Marshal Mo Hare, SASS #45984 Posted July 12, 2021 Share Posted July 12, 2021 You won’t be able to use a bench rest in combat. Link to comment Share on other sites More sharing options...
Hardpan Curmudgeon SASS #8967 Posted July 12, 2021 Author Share Posted July 12, 2021 I don't expect to have anyone shooting back at me when zeroing a new rifle scope on a private target range.... Link to comment Share on other sites More sharing options...
Duffield, SASS #23454 Posted July 12, 2021 Share Posted July 12, 2021 I cut an eight inch long 2X4 in half, with a 45Degree angle cut. I then screw these two pieces to a 12 inch long 4X4, leaving about two inches between the beveled ends. I use a sand bag on this for a front rest, and another sand bag under the butt stock. The front can be elevated if needed by sliding another 2X4 under it, or suing another sand bag. Duffield Link to comment Share on other sites More sharing options...
Texas Joker Posted July 12, 2021 Share Posted July 12, 2021 Get a cardboard box. Cut a rectangular notch in back and a v notch in the front. The stock fits in rear notch and rifle barrel in front. You can bore sight a scope in this and then paper. It's not going to hold up for a full range session. But it'll get a scope sighted in. Link to comment Share on other sites More sharing options...
G W Wade Posted July 12, 2021 Share Posted July 12, 2021 I picked up a scissor jack from a newer car. Screwed the jack onto a wooden base them mounted a small owl ear bag on top. adjustment ranges from 5 inches to about 16. Stores in a box with a couple of sand bags. Cheap , easy and adjustable GW Link to comment Share on other sites More sharing options...
Forty Rod SASS 3935 Posted July 12, 2021 Share Posted July 12, 2021 I was going to suggest a fancy steel bench in the park that's just right for naps and watching people...but I won't. I shoot over a rolled up Army blanket held with zip ties. Comes up to about eight inches in diameter, a foot or a bit less in length, is easy to carry, and solid enough for my purposes. Link to comment Share on other sites More sharing options...
Chickasaw Bill SASS #70001 Posted July 12, 2021 Share Posted July 12, 2021 bed rails on the pick up , just throw your jacket of em hood does a fine job as well CB Link to comment Share on other sites More sharing options...
The Original Lumpy Gritz Posted July 13, 2021 Share Posted July 13, 2021 Been very pleased with this one. https://www.caldwellshooting.com/rests/shooting-rests/the-rock-deluxe-shooting-rest/383774.html#start=1 OLG Link to comment Share on other sites More sharing options...
Subdeacon Joe Posted July 13, 2021 Share Posted July 13, 2021 I had made one that looked a bit like a boot jack. 2 x 8 base maybe a foot long, a piece of 1 x 6 pine about 12 inches tall with a deep notch cut into it mounted about an inch from one end (lined the notch with leather), and a long gusset of 1 x 6 pine. I think I also used a few sheet metal corner brackets. Link to comment Share on other sites More sharing options...
DeaconKC Posted July 13, 2021 Share Posted July 13, 2021 A length of rolled up outdoor carpet tied with cord has served well for years. Link to comment Share on other sites More sharing options...
Buckshot Bob Posted July 13, 2021 Share Posted July 13, 2021 Leftover shot bags filled with sand Link to comment Share on other sites More sharing options...
Hardpan Curmudgeon SASS #8967 Posted July 13, 2021 Author Share Posted July 13, 2021 1 hour ago, The Original Lumpy Gritz said: Been very pleased with this one. https://www.caldwellshooting.com/rests/shooting-rests/the-rock-deluxe-shooting-rest/383774.html#start=1 OLG That - and the Rock BR - are pretty cool. Have you or (or anyone else here) used their "Lead Sled?" There seem to be multiple iterations of it... Link to comment Share on other sites More sharing options...
The Original Lumpy Gritz Posted July 13, 2021 Share Posted July 13, 2021 Just now, Hardpan Curmudgeon SASS #8967 said: That - and the Rock BR - are pretty cool. Have you or (or anyone else here) used their "Lead Sled?" There seem to be multiple iterations of it... Not impressed at all with those 'lead-sled' things! OLG Link to comment Share on other sites More sharing options...
Crazy Gun Barney, SASS #2428 Posted July 13, 2021 Share Posted July 13, 2021 Sandbag laying on top of an ammocan that is laying on its side. Works out to be the perfect height on the benches at the range for me. Link to comment Share on other sites More sharing options...
Wallaby Jack, SASS #44062 Posted July 13, 2021 Share Posted July 13, 2021 Our club forked out and bought a "lead sled" for all to use .... ............................... lasted 2 weeks and found a secret alternate address at which to live .... Link to comment Share on other sites More sharing options...
watab kid Posted July 13, 2021 Share Posted July 13, 2021 2 hours ago, Hardpan Curmudgeon SASS #8967 said: That - and the Rock BR - are pretty cool. Have you or (or anyone else here) used their "Lead Sled?" There seem to be multiple iterations of it... yes , i use a similar one to whal OLG posted and i have the lead sled , both work very well Link to comment Share on other sites More sharing options...
Gracos Kid Posted July 13, 2021 Share Posted July 13, 2021 I have a Sinclair and have been really pleased with it.....Seems to be the Cadillac of rests.....Wouldn't have paid that much, but was a gift from my daughters and sons-in-law..... SINCLAIR INTERNATIONAL SINCLAIR COMPETITION SHOOTING REST | Sinclair Intl Link to comment Share on other sites More sharing options...
Buckshot Bob Posted July 13, 2021 Share Posted July 13, 2021 11 hours ago, Hardpan Curmudgeon SASS #8967 said: That - and the Rock BR - are pretty cool. Have you or (or anyone else here) used their "Lead Sled?" There seem to be multiple iterations of it... I have seen them crack wood stocks on heavy recoiling guns , especially if the stock has allot of figure in the wrist area . There’s no give in the set up , so something has to Link to comment Share on other sites More sharing options...
Chili Ron Posted July 13, 2021 Share Posted July 13, 2021 Howdy, Hornady made a sort of triangle red plastic rest called Delta Rest. Large opening in one end to fill with whatever you like. Gold coins would be best. Add a protector leather bag of your choice. owl ear works. A couple shoe laces ties the two together. When a change of height is needed just slide the leather bag around the Hornady rest. I filled the leather bag with crushed 22 shells. Fired first. Hornady stopped production but ebay has em cheep. Now for the bench part.... get a folding table leg set and attach a piece of plywood. Get a couple lengths of pipe that will fit around the table legs. Drill the pipe so a few bolts can secure the pipe and level the table. If you cut the plywood the right size it can fit in your trunk or pickup bed. About 24 by 42 inches is good but you may like longer or shorter whatever. Any sort of seat will work but an office chair with adjustments is great. Those fancy metal rests with all sorts of adjustments is fine until one of those little bits of critical metal comes up missing. Best CR Link to comment Share on other sites More sharing options...
irish ike, SASS #43615 Posted July 13, 2021 Share Posted July 13, 2021 Link to comment Share on other sites More sharing options...
Pat Riot Posted July 13, 2021 Share Posted July 13, 2021 The best thing I have found for bench shooting was by accident. I forgot my Hornady gun box with rifle rest. I use a backpack with some towels. One towel folded up at the rear to rest the butt on when not shooting and other towels to stuff into the backpack (day pack) if it’s not high enough. Link to comment Share on other sites More sharing options...
Noz Posted July 14, 2021 Share Posted July 14, 2021 On 7/12/2021 at 6:43 PM, Chickasaw Bill SASS #70001 said: bed rails on the pick up , just throw your jacket of em hood does a fine job as well CB A friend tried to sight in a new scope over the bed rails of his pickup. The first 3 rounds did not show on the tatget. Mystery solved when he noticed the 3 holes in the other side of the pickup bed. Link to comment Share on other sites More sharing options...
Cypress Sun Posted July 14, 2021 Share Posted July 14, 2021 On 7/12/2021 at 7:43 PM, Chickasaw Bill SASS #70001 said: bed rails on the pick up , just throw your jacket of em hood does a fine job as well CB 31 minutes ago, Noz said: A friend tried to sight in a new scope over the bed rails of his pickup. The first 3 rounds did not show on the tatget. Mystery solved when he noticed the 3 holes in the other side of the pickup bed. A friend of mine did the same thing with the hood of his truck. He sent me a picture in the mail of it. I never let him live it down. So far at the bench rests go, I'm cheap....rolled up scrap carpet or beach towel. Link to comment Share on other sites More sharing options...
Chickasaw Bill SASS #70001 Posted July 14, 2021 Share Posted July 14, 2021 well it helps to look where the nuzzle is pointed , I know of more then one case where folks forgot to do that in real life so far , I have not had that happen to me , CB Link to comment Share on other sites More sharing options...
G W Wade Posted July 14, 2021 Share Posted July 14, 2021 Just happens Midsouth Shooters has the Caldwell Rock Jr on sale for under $40 with a filled owl ear bag. Should be good Looks just like my old Hoppe's I bought 50 years ago GW Link to comment Share on other sites More sharing options...
Tall Tale Todd Posted July 14, 2021 Share Posted July 14, 2021 Well, an ironing board makes a good bench rest Link to comment Share on other sites More sharing options...
Sedalia Dave Posted July 16, 2021 Share Posted July 16, 2021 On 7/14/2021 at 8:05 AM, Chickasaw Bill SASS #70001 said: well it helps to look where the nuzzle is pointed , I know of more then one case where folks forgot to do that in real life so far , I have not had that happen to me , CB The fella I saw shoot a hole in the bed rail had those new fangled look through scope mounts. With the scope set up that high you don't see the other side of the bed in your scope. Was funny as heck at the time, but later on I did fell sorry for him as the truck wasn't even a month old when he did it and his wife was really not going to be happy. Link to comment Share on other sites More sharing options...
Pat Riot Posted July 16, 2021 Share Posted July 16, 2021 I saw a guy skim the hood of his truck a couple of times with an AR-15. The hood had a hump. He forget about the scope being mounted high over the barrel. Before I realized what he was about to do he fired two rounds. Nice truck…odd pin stripes. Link to comment Share on other sites More sharing options...
Dr. O. R. Vet Posted July 16, 2021 Share Posted July 16, 2021 10 hours ago, Pat Riot, SASS #13748 said: I saw a guy skim the hood of his truck a couple of times with an AR-15. The hood had a hump. He forget about the scope being mounted high over the barrel. Before I realized what he was about to do he fired two rounds. Nice truck…odd pin stripes. Those stripes are for when he's power drifting through a sharp corner, don't cha' know! Link to comment Share on other sites More sharing options...
Happy Jack, SASS #20451 Posted July 16, 2021 Share Posted July 16, 2021 I would suggest if it is to be a hunting rifle that you zero it with a descent bipod (Harris)If you plan to shoot off a bench (target rifle) use a descent front rest like a Sinclair. If you plan to shoot it prone definitely zero it off a bipod. It does no good to zero the rifle on something like a lead sled as the rifle will move differently in recoil off the shoulder. Link to comment Share on other sites More sharing options...
Dubious Don #56333 Posted July 17, 2021 Share Posted July 17, 2021 Crossed sticks. Leather covered where the rifle rests on it. three inch spikes for feet. Off a bench I prefer bags. There's plenty out there of different types. Sand filled are more stable. Poly beads are easier to carry. My favorite rest for the rear of the stock is one I made out of a couple of GI socks and poly beads. Squeeze it to raise the toe and the barrel goes down and vice versa. Came in very handy when I rolled out of the squad car and ended up holding a perimeter from a fixed position. A solid bagged in firearm eliminates most of the shooter induced error. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.