Tom Payne 13115 Posted July 7, 2021 Share Posted July 7, 2021 Does anyone know if these type springs are available?? Link to comment Share on other sites More sharing options...
MBFields Posted July 7, 2021 Share Posted July 7, 2021 No unless someone has made them lately. Link to comment Share on other sites More sharing options...
Larsen E. Pettifogger, SASS #32933 Posted July 7, 2021 Share Posted July 7, 2021 Winchester springs are flat sheet metal and not like the truck springs put in Ubertis. I'll give you a little hint. Just go to Ace and get a couple of washers that fit around the screw but are NOT wider than the spring. If they are wider than the spring they will interfere with installing the sideplates. Install them and they are as good as Whisper Springs in a Uberti. Link to comment Share on other sites More sharing options...
Larsen E. Pettifogger, SASS #32933 Posted July 7, 2021 Share Posted July 7, 2021 Winchester vs Uberti. Because of the different geometry and material a washer is all that is needed. Link to comment Share on other sites More sharing options...
Tom Payne 13115 Posted July 8, 2021 Author Share Posted July 8, 2021 Thank you Larsen!! Link to comment Share on other sites More sharing options...
Bullet Hole Kid SASS#81025 Posted July 8, 2021 Share Posted July 8, 2021 Good simple info, thank you Larsen. Link to comment Share on other sites More sharing options...
Lassy LaRock Posted July 9, 2021 Share Posted July 9, 2021 I think there is a big difference between this method and the soft tuning springs on a Uberti. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.