Burley Jack Posted July 2, 2021 Share Posted July 2, 2021 I have a lot of 357 brass and am looking for info on reloading info on using Trailboss and 125gn tcfp bullets…for Sass? Thanks Burley Jack… Link to comment Share on other sites More sharing options...
Edward R S Canby, SASS#59971 Posted July 2, 2021 Share Posted July 2, 2021 Whatever load you are offered, check it against Hodgdon's online data: 3.5 grains starting load, 5.3 grains maximum load. Link to comment Share on other sites More sharing options...
Roscoe Regulator Posted July 2, 2021 Share Posted July 2, 2021 I use 158 grain to control max allowed velocity. I can also get that in a bullet profile that cycles reliably in my Lightning rifle. I use 357 brass a) because I have it and b) because it allows me to crimp in the intended groove. My pistols are 38 Long Colt or 38 Special, so it is not a matter of ammo common to all the guns. My bullet is the 158 TCBB from Penn Bullets, now available coated (or not). and with optional sizing (6-8 weeks). Link to comment Share on other sites More sharing options...
Rex M Rugers #6621 Posted July 2, 2021 Share Posted July 2, 2021 When I shot 357s , loaded that same style and weight bullet with 4 Grs. Trail Boss. Worked fine. My rifle was smoother operating with the 357 cases. Rex Link to comment Share on other sites More sharing options...
Roscoe Regulator Posted July 2, 2021 Share Posted July 2, 2021 1 hour ago, Rex M Rugers #6621 said: When I shot 357s , loaded that same style bullet with 4 Grs. Trail Boss. Worked fine. Rex I am using 3.5 gr TB with the 158 gr in 357 brass and liking it. Link to comment Share on other sites More sharing options...
Null N. Void Posted July 2, 2021 Share Posted July 2, 2021 3.2 to 3.4 grains of TB with a 125 TCFP. Link to comment Share on other sites More sharing options...
Imis Twohofon,SASS # 46646 Posted July 2, 2021 Share Posted July 2, 2021 I load 125 gr RNFP in .357 cases because my 73 likes that length. I use different powder (3.1 gr of Cleanshot) so I cant help you there. Imis Link to comment Share on other sites More sharing options...
Marshal Chance Morgun Posted July 2, 2021 Share Posted July 2, 2021 Personal opinion. I'd switch to .38sp. Take it or leave it, up to you, but more shooters use .38sp. You are going to get their brass and they are going to get yours. L:ook closely before you reload. Link to comment Share on other sites More sharing options...
Bison Bud Posted July 3, 2021 Share Posted July 3, 2021 I'm pretty sure that with Trailboss you can load the powder right up to the base of the bullet without issues, but do not compress the powder. However, you can load lighter and leave a bit of air space if you want. As others have stated .357 Mag in not a real popular cowboy load. However, my little Marlin carbine rifle cycles much better with the longer rounds. Unfortunately, it also throws most of them forward of the firing line and I seldom get many spent cases back unless I try to get them after the match. Frankly, if you've got them, use them, but if you need a longer round it's also possible to long crimp .38 Special cases to get a similar overall length. Good luck and good shooting to all. Link to comment Share on other sites More sharing options...
Three Foot Johnson Posted July 3, 2021 Share Posted July 3, 2021 6 hours ago, Bison Bud said: I'm pretty sure that with Trailboss you can load the powder right up to the base of the bullet without issues, but do not compress the powder. However, you can load lighter and leave a bit of air space if you want. As others have stated .357 Mag in not a real popular cowboy load. However, my little Marlin carbine rifle cycles much better with the longer rounds. Unfortunately, it also throws most of them forward of the firing line and I seldom get many spent cases back unless I try to get them after the match. Frankly, if you've got them, use them, but if you need a longer round it's also possible to long crimp .38 Special cases to get a similar overall length. Good luck and good shooting to all. Kind of - the recommendation for Trail Boss is 70-100% load density. Figure out the useable volume from the base of the bullet, start at 70% of that, and work up if desired, but no more than 100% of useable capacity. If your chosen cartridge/caliber holds 5.7 grains to the base of a seated bullet, 5.7 x .7 = 3.99. Starting load is 4 grains, and max load is 5.7 grains. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.