Jump to content
SASS Wire Forum

WTB RCBS Die Set 44 Special / Russian


Recommended Posts

There's a set on ebay, VERY pricey.  Also several sets of Lee, much cheaper.  I use the Lee dies for Russians, seat/crimp together, and they work fine for me.

Link to comment
Share on other sites

Have a used (lightly( Lyman Multi Deluxe in 44 Russian  with 2 bullet seat stems        $75 if can get in small priorty box  if you would be interested        GW

Link to comment
Share on other sites

27 minutes ago, Preacherman said:

44 mag will work too. I'm using Dillon for my 44 Russian. 

Don't have those either.. :lol:. Bad time to look for dies.

Link to comment
Share on other sites

PS  Have 44 Russian brass too      GW

Link to comment
Share on other sites

1 minute ago, OK Dirty Dan said:

@G W Wade if Major Art Tillery isn't interested in the 44 Russian brass I am. Please PM me if it's available. Thanks!

Will do     GW

Link to comment
Share on other sites

17 minutes ago, Major Art Tillery said:

Pm sent

Nothing received       GW

Link to comment
Share on other sites

For 44 Russian on my RL550B I use the sizing and seating dies from a Hornady carbide three die set and crimp with a Lee Factory Crimp Die. All technically 44 Magnum dies. The Lee die has the crimp adjustment knob nearly bottomed-out, but it crimps beautifully. 

Link to comment
Share on other sites

5 hours ago, Mudflat Mike, SASS #20904 said:

  I've got a set of Lee 44 Russian for $20 + shipping if that's any help

I have reached a deal with G.W. Wade ..

Thank you for the offer 

Link to comment
Share on other sites

Redding does not make a 44 Russian die, so I picked up a set from RCBS before the C19 crunch.
Ordered directly from RCBS here in CA... and dropped shipped from Bass Pro.
Go figure.

Starline Brass has this brass in stock.
Lyman #50, Speer #14 (not 15), Hodgdon and Accurate 2003 all have loads for 44 Russian.

I understand there is a special carrier from the Smith Shop (www.thesmithshop.com) that allows use of 44 Russian in '66 or '73 rifles.
 

Link to comment
Share on other sites

51 minutes ago, bgavin said:

Redding does not make a 44 Russian die, so I picked up a set from RCBS before the C19 crunch.
Ordered directly from RCBS here in CA... and dropped shipped from Bass Pro.
Go figure.

Starline Brass has this brass in stock.
Lyman #50, Speer #14 (not 15), Hodgdon and Accurate 2003 all have loads for 44 Russian.

I understand there is a special carrier from the Smith Shop (www.thesmithshop.com) that allows use of 44 Russian in '66 or '73 rifles.
 

Thanks for the info!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.