Chili Ron Posted May 5, 2021 Share Posted May 5, 2021 Howdy, I just havent needed much in the way of wire cutters until now. Any suggestions on some good cutters? I would just like to get some good ones the first time and not have to buy several first. I sorta want the blackhawk 357 of wire cutters, I guess. Best CR Link to comment Share on other sites More sharing options...
Happy Jack, SASS #20451 Posted May 5, 2021 Share Posted May 5, 2021 I've owned many pairs of wire cutters over the years. Finally gave up a couple of years ago and bought a pair of FELCO cutters. Made in Switzerland. Absolutely wonderful. Cut piano wire and small (3/16")stainless steel cable like butter. Link to comment Share on other sites More sharing options...
LawMan Mark, SASS #57095L Posted May 5, 2021 Share Posted May 5, 2021 Klein Tools. https://www.kleintools.com/catalog/wire-cutters/cutting-tools Link to comment Share on other sites More sharing options...
Cypress Sun Posted May 5, 2021 Share Posted May 5, 2021 Get the right tool for the right job. What kind of wire is the intended target? The job standard for the electrical field is Klein side cutters, 2000 series. Klein makes tools for every kind of wire cutting job that you can imagine. Everything from 22 gauge wire to 1000 MCM wire. Link to comment Share on other sites More sharing options...
Finagler 6853 Life Posted May 5, 2021 Share Posted May 5, 2021 A good fencing pliers for barbed wire. Has two cutters, hammer and staple puller. A large lineman's pliers for other work. Those fancy circular cutters for wire rope so it doesn't come unwound. Can't have too many tools. Link to comment Share on other sites More sharing options...
Pat Riot Posted May 5, 2021 Share Posted May 5, 2021 I buy Snap-On cutters. Lifetime guarantee as long as you use them for what they are made for. Trouble is you have to track down a Snap-On dealer to buy them or exchange them. I also second Klein tools. Very good tools for the money. Link to comment Share on other sites More sharing options...
Cat Brules Posted May 5, 2021 Share Posted May 5, 2021 Those big lineman’s pliers, with the heavy cutter works on most jobs. Don’t ruin it on barbed wire..... Once you get to that size get a pair of small cable cutters. Cat Brules Link to comment Share on other sites More sharing options...
John Kloehr Posted May 5, 2021 Share Posted May 5, 2021 Klein for electrical work. But piano wire or barbed wire would ruin them. Get the right tool for the job Link to comment Share on other sites More sharing options...
Widder, SASS #59054 Posted May 5, 2021 Share Posted May 5, 2021 Chili, I thought this thread was gonna be about your favorite Moderator.... 'Wire Cutter'. ..........Widder Link to comment Share on other sites More sharing options...
Cat Brules Posted May 5, 2021 Share Posted May 5, 2021 I never have known who the moderator are/were ‘cept for Allie Mo. Then, I think she quit.....(they wanted to lower her pay!). Cat Brules Link to comment Share on other sites More sharing options...
John Kloehr Posted May 5, 2021 Share Posted May 5, 2021 3 minutes ago, Cat Brules said: I never have known who the moderator are/were ‘cept for Allie Mo. Then, I think she quit.....(they wanted to lower her pay!). Cat Brules I think there is a rotation here, sort of like getting called to serve on a grand jury. Link to comment Share on other sites More sharing options...
Okie Sawbones, SASS #77381 Posted May 5, 2021 Share Posted May 5, 2021 Knipex Diagonal Cutters - German made. Rugged. Link to comment Share on other sites More sharing options...
Utah Bob #35998 Posted May 5, 2021 Share Posted May 5, 2021 40 minutes ago, John Kloehr said: I think there is a rotation here, sort of like getting called to serve on a grand jury. Except ya can’t say “Hell no” to jury duty. Link to comment Share on other sites More sharing options...
Dantankerous Posted May 5, 2021 Share Posted May 5, 2021 Barbed wire? Telegraph wire? These. Link to comment Share on other sites More sharing options...
Chili Ron Posted May 5, 2021 Author Share Posted May 5, 2021 Howdy, I just need to cut little wires around the place. Not big stuff and not barbed wire. Never realized the question was so big a deal. Maybe I will just try the hardware store and hope for the best. I had a little took kit with stuff from Sweden. They seem to have walked off. Best CR Link to comment Share on other sites More sharing options...
Widder, SASS #59054 Posted May 6, 2021 Share Posted May 6, 2021 sometimes, a regular pair of wire-pliers will have a 'wire cutter' built into the rearward section of the plier area. ..........Widder Link to comment Share on other sites More sharing options...
Derringer Dan Posted May 6, 2021 Share Posted May 6, 2021 Felco or Kline 2000series are the best choices. JMTCW Link to comment Share on other sites More sharing options...
Muleshoe Bill SASS #67022 Posted May 6, 2021 Share Posted May 6, 2021 There is "wire" and there is "cable" and there is "!wire!" up to about any 18 - 22 gauge copper you can get any good electricians wire cutters. The you get into "cable" cutters and heavy gauge copper or aluminum cutters, then you get into steel wire cutters (think chain link fence) it all depends. After all all cars are not a Ferrari or a Cruz. Link to comment Share on other sites More sharing options...
sassnetguy50 Posted May 6, 2021 Share Posted May 6, 2021 2 hours ago, Chili Ron said: ... Never realized the question was so big a deal... It wouldn't be a proper saloon response if we didn't over analyze and list every possibility. I prefer a curved jaw like the Channellock 447. The cutting edge is not inline with the hand so there is room for the knuckles on a flush cut. They also allow leverage for pulling staples. https://channellock.com/product/447/ For nipping little bits around the house, the 6" straight Klein is handy. https://www.kleintools.com/catalog/standard-diagonal-cutting-pliers/diagonal-cutting-pliers-tapered-nose-6-inch Make sure whatever you get at the local hardware store is made in the USA or Germany. Link to comment Share on other sites More sharing options...
Yul Lose Posted May 6, 2021 Share Posted May 6, 2021 A bit pricey but Snap On builds some excellent flush cut dikes that work very well for electronics work and coaxial cable braid trimming. The smaller set makes a great finger nail and toenail clipper. Link to comment Share on other sites More sharing options...
Go West Posted May 6, 2021 Share Posted May 6, 2021 I always used a pair of side cutters and hung them off my back pocket at work as a welder. Cleaned the nozzles, snipped the wire and good to go. Specialty pliers for other jobs: fence pliers, wire stripping pliers, parallel jaw pliers, needle nose pliers, etc. Satisfying sound when you hear the snick, it means you made the right choice. Link to comment Share on other sites More sharing options...
Grass Range Posted May 6, 2021 Share Posted May 6, 2021 14 hours ago, Dantankerous said: Barbed wire? Telegraph wire? These. That is a typical pair of fencing pliers. I was in hurry to buy another pair and found out you could not cut both strands of barb wire at the same time as the cutters would not open far enough. Chinese made, threw them away. Link to comment Share on other sites More sharing options...
El CupAJoe Posted May 6, 2021 Share Posted May 6, 2021 15 hours ago, Chili Ron said: Howdy, I just need to cut little wires around the place. Not big stuff and not barbed wire. Never realized the question was so big a deal. Maybe I will just try the hardware store and hope for the best. I had a little took kit with stuff from Sweden. They seem to have walked off. Best CR I think you'll be happy with a Leatherman wave or surge. If you don't already carry a multitool, they come in very handy. Surge is harder to carry, but you can tackle bigger problems, both have good ergos and replaceable wire cutters if you screw them up trying to cut something too hard. Link to comment Share on other sites More sharing options...
Dantankerous Posted May 6, 2021 Share Posted May 6, 2021 1 hour ago, Grass Range said: That is a typical pair of fencing pliers. I was in hurry to buy another pair and found out you could not cut both strands of barb wire at the same time as the cutters would not open far enough. Chinese made, threw them away. Yup. The fencing tool I have I've had for 30+ years. NOT Chinese made. It ain't pretty but it still works very well. Link to comment Share on other sites More sharing options...
Grass Range Posted May 6, 2021 Share Posted May 6, 2021 1 hour ago, Dantankerous said: Yup. The fencing tool I have I've had for 30+ years. NOT Chinese made. It ain't pretty but it still works very well. I still have 2 of the old ones but the cutters are getting dull. And, I need a pair in each truck Link to comment Share on other sites More sharing options...
Chili Ron Posted May 7, 2021 Author Share Posted May 7, 2021 Howdy. That channellock 447 looks like a great place to start. The other one looks fine to. I have a multi tool but the wires are on a hard surface and it dont fit....447 Thanks. Best CR Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.