Pulp, SASS#28319 Posted April 12, 2021 Share Posted April 12, 2021 My sis in law found one of these in an old storage shed, very rusty, and the bolt was locked up. I took it home to play with, I've freed everything up, it will feed and fire a blank 20 gauge shell, then eject it. But I still need to take the bolt apart and clean the insides. I know it comes apart, just cant figger out how. Any suggestions?? Link to comment Share on other sites More sharing options...
Cypress Sun Posted April 12, 2021 Share Posted April 12, 2021 This schematic may help. https://www.gunpartscorp.com/gun-manufacturer/mossberg/shotguns-mossberg/395ka Link to comment Share on other sites More sharing options...
Chickasaw Bill SASS #70001 Posted April 12, 2021 Share Posted April 12, 2021 IN think that one is a canadate , for a can of break cleaner , an air compresser , a couple of times , then hit it wit Rem oil and the compresser again should flush most of the gunk out of there CB fast and dirty fix Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.