largo casey #19191 Posted March 22, 2021 Share Posted March 22, 2021 Need some 7.5x55 brass to get started with. Largo Link to comment Share on other sites More sharing options...
Horace Patootie, SASS #35798 Posted March 22, 2021 Share Posted March 22, 2021 Good luck. I have a 1911 rifle but no ammo. Might be good to be able to load that caliber too. Horace Link to comment Share on other sites More sharing options...
Dusty Morningwood Posted March 22, 2021 Share Posted March 22, 2021 You may have to form some. Let me look in my cartridge conversion book. Link to comment Share on other sites More sharing options...
High Road, SASS #75137 Posted March 22, 2021 Share Posted March 22, 2021 It was available from Graf’s some years ago. I have some made by Norma and some with Grafs headstamp. I have also had good results with reformed .284 Winchester brass. Regards High Road Link to comment Share on other sites More sharing options...
C.N. Double Posted March 22, 2021 Share Posted March 22, 2021 I found some on Midway USA at the end of December. When I first looked, they were out, but I set an in-stock notification. Surprisingly, only a few days later, they had some in stock, and I was able to order it. I hope you'll have similar luck.https://www.midwayusa.com/product/1021447763?pid=839223 BTW, using this PPU brass, I was able to shoot sub 3" groups with low-velocity (1400FPS) cast loads last week at 100yds. These rifles are certainly capable of better, but I was pretty happy with that for a non-standard load. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.