Jump to content
SASS Wire Forum

Trade ...... Trade pending....


Recommended Posts

Trade Pending...

 

Want to trade my AR chambered in 762x39. It has a high standards firearms lower made right here in Houston. Ghost firearms upper and BCG.  Low round count.  Removed my night vision and installed a Millet 3x9x44 scope.  1 ten round and 1 thirty round mag. Some ammo available.

I am looking for a lever action rifle preferably a 20” carbine chambered in 357.  Uberti or Winchester 1873 or 1892 replicas.  Will take a Rossi if it is a recent model and had work done.  I need this to finish up a another set up in 357.   I can add a little cash for a nice rifle. 
prefer face to face in the Houston area but will travel a bit. 
not sure about shipping in today’s time but I may.

Skinny
 

DBEC229A-8076-4FDA-8C11-B6C73104F25C.jpeg

4D63EEE8-18C8-4762-B8A9-99735D3A93A3.jpeg

5F6390FD-8B52-4066-B2FD-BC74B6D29AA0.jpeg

F00B78CB-8F86-4875-8065-6EA18B9D03F4.jpeg

176458C6-71C9-43AC-98D8-4331207C24B2.jpeg

35420725-5715-4173-8C1E-DE11F3D024A3.jpeg

1BFC97C5-1F86-4480-92D6-2D97861D9D59.jpeg

B2465D78-A3F1-4542-A375-848B6D36F82E.jpeg

Link to comment
Share on other sites

13 hours ago, Tell Sackett SASS 18436 said:

7.62??

it says .223/5.56 on it! 

Which is it? if its 5.56 I might be interested.

doesn't matter what the lower says, the upper is in 7.62x39. 

 

On 2/23/2021 at 12:30 AM, Skinny snake eyes pickins said:

I am looking for a lever action rifle preferably a 20” carbine chambered in 357.  Uberti or Winchester 1873 or 1892 replicas.

If you can find a sale for the AR, I have a lead on a New 20" Miroku 73 in .357 mag, I can give you.  I don't think he would be interested in your gun but he'd sell and ship to an FFL.  PM if you want details.

Link to comment
Share on other sites

If you want a durable 7.62x39 AR-15 upper you need a CMMG 7.62x39 upper.  The 7.62x39 has a larger rim diameter than 223/5.56. That means there is less metal in the bolt that surrounds the case base.  CMMG has a proprietary upper, bolt carrier & bolt that has more metal.  AR-15 7.62x39 bolts are known to have short life spans.

P.S.  If you want an AR lower that doesn't have caliber marking PSA has generic stripped lowers.

Link to comment
Share on other sites

Tell sacket

7.62??

it says .223/5.56 on it! 

Which is it? if its 5.56 I might be interested.   

 

It is a 762 upper.  

 

 

JD Daily

If you want a durable 7.62x39 AR-15 upper you need a CMMG 7.62x39 upper.  The 7.62x39 has a larger rim diameter than 223/5.56. That means there is less metal in the bolt that surrounds the case base.  CMMG has a proprietary upper, bolt carrier & bolt that has more metal.  AR-15 7.62x39 bolts are known to have short life spans.

P.S.  If you want an AR lower that doesn't have caliber marking PSA has generic stripped lowers.

 

JD    I have changed the bolt and the firing pin to the longer pin.   the lower is just marked 556.

 

 

Sorry for the late response guys I have been really busy..  I work for an airline and times are crazy these days.

 

I have a trade pending down here in Texas and I am swapping out the lower with a Anderson that reads Multi.    That seemed to bother people.  Its the right thing to do.  I have several .  the lower pictured is a better made lower and is home town.   Also most people want 556 and this would be correct if you mated it to a 556 upper.

 

Skinny

 

 

 

 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.