Pit Bull Tex Posted February 10, 2021 Share Posted February 10, 2021 HP 38 or W 231.What else can I use? I can't find either one os these. Link to comment Share on other sites More sharing options...
Michigan Slim Posted February 10, 2021 Share Posted February 10, 2021 I use Red Dot and like it much. Link to comment Share on other sites More sharing options...
Pit Bull Tex Posted February 10, 2021 Author Share Posted February 10, 2021 Any chance of finding that? Link to comment Share on other sites More sharing options...
Edward R S Canby, SASS#59971 Posted February 10, 2021 Share Posted February 10, 2021 Which .32? For H&R mags I've used Bullseye, Unique and VV N-320. Wife likes the N-320 the best. Link to comment Share on other sites More sharing options...
Pit Bull Tex Posted February 10, 2021 Author Share Posted February 10, 2021 I will look for all of these.I have some W 296 that feeds great in the 550.I can't find any data for it for 32s. Link to comment Share on other sites More sharing options...
Pit Bull Tex Posted February 10, 2021 Author Share Posted February 10, 2021 Any one in SASS sell powder? Link to comment Share on other sites More sharing options...
Mudflat Mike, SASS #20904 Posted February 10, 2021 Share Posted February 10, 2021 Been using Red Dot and 700X for years, like 'em both Link to comment Share on other sites More sharing options...
Burn Through Posted February 10, 2021 Share Posted February 10, 2021 I use 16.5 grains of 3 f goex in 32-20 with a 100 grain bullet works good , but have to do some clean up after I shoot them but that is not bad . GOOD LUCK Link to comment Share on other sites More sharing options...
Ozark Okie Posted February 10, 2021 Share Posted February 10, 2021 Pit Bull, I can only relate my experience. I used Trail Boss when I was shooting 38/357 and because I had it, l looked up 32 loads when I decided to go with 32 caliber. So far, I have fired a couple hundred rounds that all worked fine. - Trail Boss - 2.2 - 2.5 grains - RNFP 115gr - Starline 32 caliber brass - Federal small pistol primers YMMV, but this has worked well for me so far. I'm leaning towards the slightly heavier loads (2.5) to get a better chamber seal. Good Luck OO Link to comment Share on other sites More sharing options...
Boulder Canyon Bob# 32052L Posted February 10, 2021 Share Posted February 10, 2021 2.4 Trail Boss 78 gr bullet Link to comment Share on other sites More sharing options...
Widder, SASS #59054 Posted February 10, 2021 Share Posted February 10, 2021 Pit Bull, you didn't specify WHICH .32, but if its for .32 H&R cases, here are my favorites: Load data listed works great for bullet weights 78 gr up to 100 gr. 1. Clean Shot 3.0 - 3.2 gr Meters better than any powder I've tried and super consistent in its velocities 2. Red Dot 3.0 - 3.2 gr another great powder 3. Bullseye 2.8 gr Best accuracy and probably the cleanest. 4. Titegroup 2.6 gr If you close your eyes, TiteGroup is as good as the other 3 in all aspects. I've tested Unique (3.0 gr) and Universal (3.0 gr) with good results, BUT..... not nearly as well as I like the other 4 powders I listed above. Again, these powders and listed charges worked VERY WELL in bullet weights from 78 to 100 grains, in the 32 H&R case. ..........Widder Link to comment Share on other sites More sharing options...
Pit Bull Tex Posted February 10, 2021 Author Share Posted February 10, 2021 Thanks Widder.The problem is just finding any powder. Link to comment Share on other sites More sharing options...
Three Foot Johnson Posted February 10, 2021 Share Posted February 10, 2021 I use Unique in both .32 H&R mag and .32-20, but I came across an 8# jug of Red Dot not too long back, so with Widder's glowing endorsement, I might have to give it a try. Link to comment Share on other sites More sharing options...
Sedalia Dave Posted February 10, 2021 Share Posted February 10, 2021 Which flavor of 32 are you reloading? What bullet weight? What powders do you have on hand right now? Link to comment Share on other sites More sharing options...
Tom Bullweed Posted February 10, 2021 Share Posted February 10, 2021 90-100 grain in .32 H&R mag: Titegroup 2.7 gr Reddot 3.2 gr W-231 I like .32s at around 900 fps to get enough recoil so the hammer rolls back to my thumb. Link to comment Share on other sites More sharing options...
Snake-eye, SASS#45097 Posted February 10, 2021 Share Posted February 10, 2021 I’ve been using .32 S&W long brass in my Rugers for about 4 years using the following with very good success. 78 gr coated and lead bullets. Any of these loads have been able to take down shotgun knock down targets as well as plates. They provide good ring on steel for spotters as well. T. B. 1.8 - 2 gr Win 244 2 - 2.1 gr Red Dot 2.1 gr Clays 2.2 gr. Link to comment Share on other sites More sharing options...
The Original Lumpy Gritz Posted February 10, 2021 Share Posted February 10, 2021 Which .32? Unique works well. OLG Link to comment Share on other sites More sharing options...
Polecat Joe Posted February 10, 2021 Share Posted February 10, 2021 I use 1.9 grs of Clays for a 90 gr bullet Link to comment Share on other sites More sharing options...
Big Timber SASS #19724Life Posted February 10, 2021 Share Posted February 10, 2021 Bullseye, Tight group,800 X All have worked well for me Link to comment Share on other sites More sharing options...
Oklahoma Dee Posted February 10, 2021 Share Posted February 10, 2021 1 hour ago, polecat joe said: I use 1.9 grs of Clays for a 90 gr bullet I use 1.9 grs of Clay Dot for 115 gr 32H&R Mag. Brings most any knockdowns at the old Winter Range and the old EOT shoots. Link to comment Share on other sites More sharing options...
evil dogooder Posted February 10, 2021 Share Posted February 10, 2021 I've seen promo used as well Link to comment Share on other sites More sharing options...
Old Man Graybeard Posted February 10, 2021 Share Posted February 10, 2021 I have been loading 32 S&W Long with 1.7 of Bullseye and a 100 grain bullet. Grandson has been taking down knockdowns easier than some peoples 38 loads Link to comment Share on other sites More sharing options...
Captain Bill Burt Posted February 10, 2021 Share Posted February 10, 2021 For my wife's pistols I load .32 H&R magnum cases, federal small pistol primers, 105 grain bullet in front of 2.3 of Clays. Link to comment Share on other sites More sharing options...
H. K. Uriah, SASS #74619 Posted February 10, 2021 Share Posted February 10, 2021 For .32 S&W, .32 S&W Long, .32-20 and rounds for my Nagant revolver using reformed .32-20 brass, I use Trailboss. Link to comment Share on other sites More sharing options...
Pit Bull Tex Posted February 10, 2021 Author Share Posted February 10, 2021 I have trail Boss ,Clays and W 296. 32 H&R cases I have some 32 S & W longs also. Link to comment Share on other sites More sharing options...
Krazy Kajun Posted February 10, 2021 Share Posted February 10, 2021 I've used 2.3 gr Clays and a 100gr bullet in .32 mag case. I also have used Universal Clays with good results. Kajun Link to comment Share on other sites More sharing options...
Crazy Gun Barney, SASS #2428 Posted February 10, 2021 Share Posted February 10, 2021 can't believe one of my favorite powders hasn't been mentioned yet... fffg Link to comment Share on other sites More sharing options...
Bailey Creek,5759 Posted February 10, 2021 Share Posted February 10, 2021 Clays works well. Link to comment Share on other sites More sharing options...
Cumberland Mtn John SASS#40593 Posted February 10, 2021 Share Posted February 10, 2021 I always loaded my 32 S&W long and 32 H&R Magnums with Bullseye. CMJ Link to comment Share on other sites More sharing options...
Three Foot Johnson Posted February 10, 2021 Share Posted February 10, 2021 2 hours ago, Crazy Gun Barney, SASS #2428 said: can't believe one of my favorite powders hasn't been mentioned yet... fffg Perhaps you didn't read the previous posts. Link to comment Share on other sites More sharing options...
Crazy Gun Barney, SASS #2428 Posted February 10, 2021 Share Posted February 10, 2021 1 hour ago, Three Foot Johnson said: Perhaps you didn't read the previous posts. Must have missed that one. That makes two of us that are using the correct powder. Link to comment Share on other sites More sharing options...
Jailhouse Jim, SASS #13104 Posted February 10, 2021 Share Posted February 10, 2021 3 hours ago, Crazy Gun Barney, SASS #2428 said: can't believe one of my favorite powders hasn't been mentioned yet... fffg Better yet in those small cases, FFFFG. Plenty of smoke and boom. Link to comment Share on other sites More sharing options...
High Spade Mikey Wilson Posted February 10, 2021 Share Posted February 10, 2021 32-20, 2.3 gr Trail Boss, 100 gr bullet is what I shoot. Link to comment Share on other sites More sharing options...
twelve mile REB Posted February 10, 2021 Share Posted February 10, 2021 4 hours ago, Pit Bull Tex said: I have trail Boss ,Clays and W 296. 32 H&R cases I have some 32 S & W longs also. w296 is a powder that is more suitable for magnum loads in larger cases. Link to comment Share on other sites More sharing options...
Buffalo Dick, SASS #12880 Posted February 10, 2021 Share Posted February 10, 2021 VV n320 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.